REW Beta Release REW API beta releases

[Ettore]

Thanks again, John! Using Java solved the crackling problem.
However, I haven't been able to find a way to play two channels simultaneously, aside from the available L+R preset.
So, with Java, there's no option to select a secondary output like with ASIO? Isn't it possible, for example, to sweep with both surrounds simultaneously, rather than Center plus LFE?
Ettore

 

[John Mulcahy]

There's an option on the generator to send the signal to the timing ref output, so you could select a second channel as the timing ref output. Most measurements are better made individually, if a timing reference is used when measuring you can subsequently get any desired combination by summing measurements using trace arithmetic.

 

[AVNPao]

Hi John!

I ran into the following errors when using the API. I'm still trying to see if I can narrow down the issues on my end to identify exactly what's causing the errors. But I thought I'd leave the stack trace here first as you might be able to glean something from them:

REW V5.40 Beta 113 running Eclipse Adoptium JRE 11.0.29 64-bit on OS X 15.7.3 Language en, country US, keyboard US, UTF-8 Screen 2560 x 1440 at 109 DPI Running in /Applications/REW
 

Message:
    java.lang.ArrayIndexOutOfBoundsException: Index 32767 out of bounds for length 32767
Stack Trace:
Index 32767 out of bounds for length 32767
    roomeqwizard.LA.h(y:2641)
    roomeqwizard.LA.b(y:3374)
    roomeqwizard.LA.F(y:2375)
    roomeqwizard.LA.preferenceChange(y:979)
    java.prefs/java.util.prefs.AbstractPreferences$EventDispatchThread.run(AbstractPreferences.java:1543)

REW V5.40 Beta 113 running Eclipse Adoptium JRE 11.0.29 64-bit on OS X 15.7.3 Language en, country US, keyboard US, UTF-8 Screen 2560 x 1440 at 109 DPI Running in /Applications/REW
 

Message:
    java.lang.NullPointerException
Stack Trace:
    roomeqwizard.LA.h(y:2942)
    roomeqwizard.LA.b(y:3374)
    roomeqwizard.LA._(y:3496)
    roomeqwizard.graphgroup.P$5.actionPerformed(y:3028)
    java.desktop/javax.swing.JComboBox.fireActionEvent(JComboBox.java:1264)
    java.desktop/javax.swing.JComboBox.setSelectedItem(JComboBox.java:589)
    roomeqwizard.graphgroup.P.A(y:974)
    roomeqwizard.api.RTAService$4.run(y:1168)
    java.desktop/java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:313)
    java.desktop/java.awt.EventQueue.dispatchEventImpl(EventQueue.java:770)
    java.desktop/java.awt.EventQueue$4.run(EventQueue.java:721)
    java.desktop/java.awt.EventQueue$4.run(EventQueue.java:715)
    java.base/java.security.AccessController.doPrivileged(Native Method)
    java.base/java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:85)
    java.desktop/java.awt.EventQueue.dispatchEvent(EventQueue.java:740)
    java.desktop/java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:203)
    java.desktop/java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:124)
    java.desktop/java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:113)
    java.desktop/java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:109)
    java.desktop/java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)
    java.desktop/java.awt.EventDispatchThread.run(EventDispatchThread.java:90)

REW V5.40 Beta 113 running Eclipse Adoptium JRE 11.0.29 64-bit on OS X 15.7.3 Language en, country US, keyboard US, UTF-8 Screen 2560 x 1440 at 109 DPI Running in /Applications/REW
 

Message:
    java.util.concurrent.ExecutionException: java.lang.NullPointerException
Stack Trace:
java.lang.NullPointerException
    java.base/java.util.concurrent.FutureTask.report(FutureTask.java:122)
    java.base/java.util.concurrent.FutureTask.get(FutureTask.java:191)
    java.desktop/javax.swing.SwingWorker.get(SwingWorker.java:613)
    roomeqwizard.L.A$2.done(y:2059)
    java.desktop/javax.swing.SwingWorker$5.run(SwingWorker.java:750)
    java.desktop/javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.run(SwingWorker.java:847)
    java.desktop/sun.swing.AccumulativeRunnable.run(AccumulativeRunnable.java:112)
    java.desktop/javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.actionPerformed(SwingWorker.java:857)
    java.desktop/javax.swing.Timer.fireActionPerformed(Timer.java:317)
    java.desktop/javax.swing.Timer$DoPostEvent.run(Timer.java:249)
    java.desktop/java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:313)
    java.desktop/java.awt.EventQueue.dispatchEventImpl(EventQueue.java:770)
    java.desktop/java.awt.EventQueue$4.run(EventQueue.java:721)
    java.desktop/java.awt.EventQueue$4.run(EventQueue.java:715)
    java.base/java.security.AccessController.doPrivileged(Native Method)
    java.base/java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:85)
    java.desktop/java.awt.EventQueue.dispatchEvent(EventQueue.java:740)
    java.desktop/java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:203)
    java.desktop/java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:124)
    java.desktop/java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:113)
    java.desktop/java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:109)
    java.desktop/java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)
    java.desktop/java.awt.EventDispatchThread.run(EventDispatchThread.java:90)
Caused by:
    java.lang.NullPointerException
    roomeqwizard.siggen.K.A(y:6463)
    roomeqwizard.siggen.K.I(y:2048)
    roomeqwizard.siggen.K.A(y:1001)
    roomeqwizard.siggen.F.ʠ(y:505)
    roomeqwizard.siggen.F$9.C(y:1436)
    roomeqwizard.L.A$2.A(y:238)
    roomeqwizard.L.A$2.doInBackground(y:3207)
    java.desktop/javax.swing.SwingWorker$1.call(SwingWorker.java:304)
    java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264)
    java.desktop/javax.swing.SwingWorker.run(SwingWorker.java:343)
    java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128)
    java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628)
    java.base/java.lang.Thread.run(Thread.java:829)

 

[John Mulcahy]

The first two are coming from RTA initialisation, likely caused by changes to RTA settings while it is still processing a previous change. You must wait for a response from all API calls before issuing another call, if you are not doing that. The third is from the signal generator, when it is trying to show preview data for a multitone sequence before the sequence has been generated. Not sure how that's possible, again perhaps by issuing repeated API calls without waiting for responses.

 

[AVNPao]

The first two are coming from RTA initialisation, likely caused by changes to RTA settings while it is still processing a previous change. You must wait for a response from all API calls before issuing another call, if you are not doing that. The third is from the signal generator, when it is trying to show preview data for a multitone sequence before the sequence has been generated. Not sure how that's possible, again perhaps by issuing repeated API calls without waiting for responses.

Understand; thank you!

For the RTA settings, it does seem like that is indeed the case. For reference, here is the python code that I'm running. Putting sleep timers of a few seconds before each line seems to resolve the issue. I will experiment more with the multitone generator

import requests
import json
import time


BASE_URL = "http://localhost:4735"

def rew_put_json(endpoint, payload):
    
    r = requests.put(
        f"{BASE_URL}{endpoint}",
        json=payload
    )
    r.raise_for_status()
    # print(f"API response: {r.json()}")
    return r.json()

def rew_post_json(endpoint, payload):
    
    r = requests.post(
        f"{BASE_URL}{endpoint}",
        json=payload
    )
    r.raise_for_status()
    # print(f"API response: {r.json()}")
    return r.json()



sample_rate = 192000
r = rew_post_json("/audio/samplerate", {'value':sample_rate,'unit':'Hz'})

print(f"Starting RTA...")
rew_post_json("/rta/command", {"command": "Start"})

time.sleep(3)

print(f"Stopping RTA...")
rew_post_json("/rta/command", {"command": "Stop"})


sample_rate = 48000
r = rew_post_json("/audio/samplerate", {'value':sample_rate,'unit':'Hz'})

default_rta_settings = {"fftLength": "64k"}
r = rew_post_json("/rta/configuration", default_rta_settings)
# r = rew_put_json("/rta/configuration", default_rta_settings) # Running the put command doesn't work either.

 

[FargateOne]

Hi John,
I am again trying to prove that Arcam can't implement Dirac in their receivers. Today I see that in the info of REW measurement. My laptop is on Win11 and the info shows Win10. What do I miss? I can sleep with that but just in case it could be important against Harman Luxury...

 

[John Mulcahy]

Understand; thank you!

For the RTA settings, it does seem like that is indeed the case. For reference, here is the python code that I'm running. Putting sleep timers of a few seconds before each line seems to resolve the issue. I will experiment more with the multitone generator

Use the API in blocking mode. Setting the sample rate will trigger a re-init of the RTA, that may still be in progress when you set the RTA length, leading to the error. I'll see about stopping that from causing an issue in the next build.

 

[John Mulcahy]

My laptop is on Win11 and the info shows Win10.

Measurements made with the 5.40 beta build will correctly identify Windows 11. Windows 11 actually identifies itself as Windows 10 when asked for the OS version, but with a different build number.

 

[AVNPao]

Hi John, I’ve encountered something that doesn’t really make sense to me. I’m using the stepped measurement feature to measure the IMD vs level for my DAC.

After running the measurement, I saved the current RTA stepped measurement graph to the main window. I only have 1 measurement loaded in the main window. When queuing the graph’s distortion using the API, I seem to be getting results that don’t line up with the graph at all.

I've attached a capture of my graph and the .mdat file. Below are the results from the API call.

According to the graphs, the TD+N (%) takes values between values between 1 and ~6e-3.
Likewise the IMD_SMPTE curve takes values of ~0.02% toward the left and bottom out around 5e-4%.

Below is the output I get when I query for the distortion values using the API. For IMD and TD+N, there are no values close to what is shown in the graph. The results would suggest a flat line for all the data. Would you happen to know what might be happening?

Stepped measurement settings:
- IMD vs Level: SMPTE
- Start level: -60 dBFS
- End level: -2 dBFS
- Stepsize: 2 dBFS

{'measurement': 'Stepped IMD SMPTE',
 'type': 'IMD SMPTE (60 Hz & 7 kHz 4:1) vs level',
 'columnHeaders': ['Gen (dBFS)',
  'Fundamental (dB)',
  'IMD (%)',
  'TD+N (%)',
  'Noise (%)'],
 'data': [[57.429, 103.018, 0.231, 0.488, 0.011],
  [59.429, 103.018, 0.231, 0.488, 0.011],
  [61.429, 103.018, 0.231, 0.488, 0.011],
  [63.429, 103.018, 0.231, 0.488, 0.011],
  [65.429, 103.018, 0.231, 0.488, 0.011],
  [67.429, 103.018, 0.231, 0.488, 0.011],
  [69.43, 103.018, 0.231, 0.488, 0.011],
  [71.429, 103.018, 0.231, 0.488, 0.011],
  [73.43, 103.018, 0.231, 0.488, 0.011],
  [75.43, 103.018, 0.231, 0.488, 0.011],
  [77.43, 103.018, 0.231, 0.488, 0.011],
  [79.43, 103.018, 0.231, 0.488, 0.011],
  [81.43, 103.018, 0.231, 0.488, 0.011],
  [83.43, 103.018, 0.231, 0.488, 0.011],
  [85.43, 103.018, 0.231, 0.488, 0.011],
  [87.43, 103.018, 0.231, 0.488, 0.011],
  [89.43, 103.018, 0.231, 0.488, 0.011],
  [91.43, 103.018, 0.231, 0.488, 0.011],
  [93.43, 103.018, 0.231, 0.488, 0.011],
  [95.43, 103.018, 0.231, 0.488, 0.011],
  [97.43, 103.018, 0.231, 0.488, 0.011],
  [99.43, 103.018, 0.231, 0.488, 0.011],
  [101.43, 103.018, 0.231, 0.488, 0.011],
  [103.43, 103.018, 0.231, 0.488, 0.011],
  [105.43, 103.018, 0.231, 0.488, 0.011],
  [107.43, 103.018, 0.231, 0.488, 0.011],
  [109.43, 103.018, 0.231, 0.488, 0.011],
  [111.43, 103.018, 0.231, 0.488, 0.011],
  [113.43, 103.018, 0.231, 0.488, 0.011],
  [115.427, 103.018, 0.231, 0.488, 0.011]]}

 

[AVNPao]

Use the API in blocking mode. Setting the sample rate will trigger a re-init of the RTA, that may still be in progress when you set the RTA length, leading to the error. I'll see about stopping that from causing an issue in the next build.

Thank you! I will take a look at this.

Meanwhile I added a small delay in my function that makes the api calls and I’ve not ran into any errors since!

 

[John Mulcahy]

I’ve encountered something that doesn’t really make sense to me. I’m using the stepped measurement feature to measure the IMD vs level for my DAC.

Stepped measurements are saved automatically when the measurement ends. If you are doing a manual save after that you are probably just capturing the last point of the step sequence.

 

[FargateOne]

Measurements made with the 5.40 beta build will correctly identify Windows 11. Windows 11 actually identifies itself as Windows 10 when asked for the OS version, but with a different build number.

my version is 5.31.3 . I should have mentionned it. No big deal.