Latest activity

Yes, that’s my experience - the problem was introduced with Roon 2.0 Build 1272. I’ve raised a support call as well as a thread in the...

I misread your post. I thought you were saying there is a convolver version 1.8 now. I turns out you were talking about Roon 1.8 !! So...

You can generate periodic noise over custom bandwidths and look at the output on the RTA.

Just loop the crossover output back to your sound card input. Signal generator and RTA for real-time analysis, or run measurement sweep.

Just loop the crossover output back to your sound card input. Signal generator and RTA for real-time analysis, or run measurement sweep.

You can generate periodic noise over custom bandwidths and look at the output on the RTA.

@John Mulcahy Thanks I'll give that a try. I used the target level I did because this is for Home Theater and I tent to use Dynamic...

Using the room curve for that isn't a good approach with the response you have. If there was tons of excess low end response that might...

Using the room curve for that isn't a good approach with the response you have. If there was tons of excess low end response that might...

The Review I have long admired audio and design philosophies developed and deployed by Harman International. Even a partial listing of...

Builds updated today to fix lag/interface issues: Fixed: Some actions could trigger repeated smoothing causing interface problems and lags

:heehee: Brilliant way to break in this review, Tom. "Ever-suffering mother," such a simple phrase that leads the mind to imagining so...

I would like to generate a pink or white noise signal (BW limited) to inject into an electronic variable crossover and view the...

Appreciate it- I know human error can happen but my settings haven't changed that I know of. I love rise to start at 100hz and flatten...

If you attach the mdat file I'll take a look at it, but performance on my test measurements is unchanged from earlier versions.