Need help hooking up your receiver or other devices?

[ArchiMark]

Tried recording my voice with Audacity. It worked.

Tried REW (latest Mac version) now and did another sweep graph. See attached and let me know if this is looking more like you would expect or not.

 

[Keith_W]

OK if it recorded your voice with Audacity then it suggests that the problem is a REW setting.

That sweep you took does not look like what I would expect. It is still very low level and it's missing a lot of bass frequencies. Would you be able to post your mic cal file so that I can examine it? There might be a typo in there somewhere.

 

[ddude003]

Yea, that does not look like a standard SPL frequency sweep... Are you playing the frequency sweep into the RTA by any chance??? If so, you need to go back to making a measurement with a frequency sweep... https://www.roomeqwizard.com/help/help_en-GB/html/makingmeasurements.html might be something to read...

Those book shelf speaker don't dig too deep @Keith_W... Frequency Response ± 6dB is 50Hz-25kHz...

 

[ArchiMark]

Thanks again, guys....

@Keith_W I'M attaching the UMIK-1 calibration file.

Yes, I'm playing the sweep into RTA, thought that this was what I needed to do....that was just for checking my setup?

OK, will go try doing what you suggest @ddude003

 

[Keith_W]

Nothing wrong with your cal file. Well, I guess now I am really out of ideas. Just as a sanity check ... you can actually HEAR the pink noise that you are playing, yes? Have you tried taking a sweep?