changing channel assignment

Ofer

Member
Thread Starter
Joined
Mar 15, 2021
Messages
159
My AV System  
Preamp, Processor or Receiver
miniDSP 4x10hd
Main Amp
Emotiva XPR200 midrange amp
Additional Amp
Crest audio 2001A bass amp
Other Amp
Rotel RA930ax twitter amp
Computer Audio
Sony Bravia android TV
DAC
miniDSP 4*10HD
Front Speakers
Andromeda MkII
Screen
Sony bravia 65XF9005
Streaming Subscriptions
Deezer HiFi
Other Equipment
Marantz original 5E CD
This might be a trivial question but I am a bit hysterical about sending the wrong signal and blowing a tweeter.
In the speaker setup menu the channel assignment are fixed 0-6 in the case below.
54217

In the measurement setup menu the output channels can be changed. In the example below channel 1 was changed from mid right to bass left etc.
54218

In the final file for the convolver what is the channel arrangement? the original one or the one from the measurement setup?
 
Last edited:

juicehifi

Audiolense
Staff member
Joined
Feb 5, 2018
Messages
517
It is the one from the measurement. that defines the actual routing. The one in the speaker setup is based on the waveformatextensible standard.

Use "check speaker connections" if you're unsure. It starts with the tweeters and work towards lower frequencies.
 

Ofer

Member
Thread Starter
Joined
Mar 15, 2021
Messages
159
My AV System  
Preamp, Processor or Receiver
miniDSP 4x10hd
Main Amp
Emotiva XPR200 midrange amp
Additional Amp
Crest audio 2001A bass amp
Other Amp
Rotel RA930ax twitter amp
Computer Audio
Sony Bravia android TV
DAC
miniDSP 4*10HD
Front Speakers
Andromeda MkII
Screen
Sony bravia 65XF9005
Streaming Subscriptions
Deezer HiFi
Other Equipment
Marantz original 5E CD
Thanks Bernt,
Another one. Is it possible to make a crossover only filter? Lets say I want to compare w/w_o correction filters. How can I make a filter that only has crossover without FR correction? for speaker alignment and TTD it is just un-ticking the relevant boxes.
 

juicehifi

Audiolense
Staff member
Joined
Feb 5, 2018
Messages
517
Use partial correction. No correction from 0 or 1 Hz, depending on whether you want time alignment or not.
 

Ofer

Member
Thread Starter
Joined
Mar 15, 2021
Messages
159
My AV System  
Preamp, Processor or Receiver
miniDSP 4x10hd
Main Amp
Emotiva XPR200 midrange amp
Additional Amp
Crest audio 2001A bass amp
Other Amp
Rotel RA930ax twitter amp
Computer Audio
Sony Bravia android TV
DAC
miniDSP 4*10HD
Front Speakers
Andromeda MkII
Screen
Sony bravia 65XF9005
Streaming Subscriptions
Deezer HiFi
Other Equipment
Marantz original 5E CD
Thanks, which one will provide time alignment?
 
Top Bottom