Ofer

What audio interface do you use? what is the advantage of VoiceMeter over VB-Audio? I use LoopBeAudio and found it much better for then...

Hi, As you have HLC you could ask Mitch for his method of measurement with REW. I don't post it here as I am not sure if he wants it...

yes

That was it! Thanks a lot. Why did "air" cause that?

Hi all, I switched to an asio interface Focusrite 4i4 3rd gen. To calibrate the line output (not headphone) output was connected to...

In that respect, not putting down the UMIK, it seems you aquired a very high quality measurement mic. Is the Motu used only for...

I actually ended up picking one up along with ISEMcon mic. @2234rew helped to convince me to move away from the USB mic (Thanks!)...

A few folks in this forum use the Motu ultralight mk5 for measurements and as their main DAC. It has 10 outputs and the prices are...

https://www.avnirvana.com/threads/beginner-trying-to-figure-stuff-out.12398/ Checkout post 5 by Bernt, could this be the issue?

Hi @mccarty350, Thanks for asking ,yes I have, for a while now it is working, nearly, flawlessly. My savior was HLC. It is the only...

That is an impressive setup. The convolver is going through roon? It is impressive that such a small speaker goes all the way to ~40hz.

My target goes down to -40db but I haven't experimented with that much. Sometimes AL tries to compensate the measurement to the target...

Your target looks fine. A few notes from my experience. It helps to have the target close to the measurement, in your case you have a...

OK. But when the filter is created it creates a 5.1 or 2.0 filter?

Got it, Thanks a lot! Edit: For some reason after I can't save this setup. Every time I open it in Edit spaeker setup it reverts back to...