UAD Apollo x 4 calibration error.

[Vatzek]

This is my next attempt at REW. Unfortunately, another failure.
At first I thought that the output and input connection was wrong, due to the connection via the subwoofer. Now I disconnected the sub and used only one cable to connect out to in. Everything goes fine until the soundcard is calibrated. After setting the level to around -11.53dB and pressing next x2 I get an error message: "ASIO device has been rest due to Request from driver..."
I have attached pictures of my individual steps. Also the method of connection (only power cable, Thunderbolt cable and audio (in red) is connected). Has anyone encountered a similar problem? Any advice please?

Windows 10Pro
UAD Apollo x4
Adam A77X
Adam Sub 10MK2

 

[John Mulcahy]

Not sure what would prompt the driver to issue a reset, can happen if the sample rate changes with some drivers but it was already in use for the level check so seems odd.. You could try the WASAPI Exclusive drivers, select Java instead of ASIO and choose the device entries that start EXCL.

 

[sm52]

What ASIO buffer? Try to make it 1024.

 

[Vatzek]

What ASIO buffer? Try to make it 1024.

128,
let me try with 1024