Switching input channels

[oliver]

Dear John,
I do have a Fireface UC multi channel audio interface and REW last build, on High Sierra OSX.
I do use two channels for SPL measurement and two channels for Impedance measurement.
there is a way to quickly recall the two channels according to the measurement to be made, such as a preset to record and then recall?
With the REW paid version will I be able to do that?
Another question, when I start REW, I have always to hit "set output channel mapping" in order to see the number of the channels, it seem that REW doesn't store this setting.
Best Regards,
Oliver.

 

[John Mulcahy]

There isn't a way to save different input configurations, no plans for that. Output channel mapping selections should persist unless the device is not present while REW is running.

 

[oliver]

Hello John,
The audio interface is alway on and not used by other software when I start REW, but the output channel mapping selection is always not remembered.
Would be great if you could consider in the future to add a way to switch different input configurations.ùThank you,
Best regards.
Oliver

 

[John Mulcahy]

Can you show me what you get on startup and how you have the mapping set before shutting down?