REW Impedence measurement QMS and QES are way out -Please help

Peregrine

Registered
Thread Starter
Joined
Aug 1, 2021
Messages
14
You have made several attempts to measure T / S parameters. I'm talking about the average between them. If it is 9.55 g, then the weight of all weights should be 8.3-8.6 g. If we divide it into 4 weights, we get 2.15 g, one out of four.
Each measurement yielded the same Mms result of 9.55g for the 6 inch driver. Thus the average remains 9.55g? Am I missing something.
 

Peregrine

Registered
Thread Starter
Joined
Aug 1, 2021
Messages
14
Can air pressure have an impact on measurements? Where I am in Johannesburg is 1700m above sea level.
 

jschwender

Member
Joined
Mar 16, 2021
Messages
140
Location
GERMANY
More  
Front Speakers
Nubert digital pro
Other Speakers or Equipment
Philips dss940
Is the result depend on the sweep length in use?
 

sm52

Member
Joined
Mar 14, 2019
Messages
863
Peregrine,
I think yes. But not dramatically. A little. Accuracy is most dependent on the selected weight. The mass should be measured with two decimal places. With accurate scales.
 
Top Bottom