Optimal REW settings for measuring amplifiers

[reallystate]

I suggest considering a proposal to add the option to display a line indicating the integrated noise level on the RTA screen and the saved spectrum screen. This would be useful for seeing which harmonics or intermodulations do not exceed the integrated noise level.

 

[carsound]

Power is a relative value; it depends on the resistance of your load. If the resistance value is not specified in your test, then power is less important. In relation to power, voltage is more important than power or amperes.

 

[reallystate]

Power is a relative value; it depends on the resistance of your load. If the resistance value is not specified in your test, then power is less important. In relation to power, voltage is more important than power or amperes.

Which message exactly are you replying to?

 

[carsound]

You can go to ap.com, website, it is have mesurement amp white paper

 

[reallystate]

I suggest considering a proposal to add the option to display a line indicating the integrated noise level on the RTA screen and the saved spectrum screen. This would be useful for seeing which harmonics or intermodulations do not exceed the integrated noise level.

@John Mulcahy, what do you think about this?

 

[John Mulcahy]

The integrated noise level is pretty high, I don't think it would make a good reference in most cases. It is available to plot on the Distortion graph for stepped sine measurements.