Monster Power HTS 3600 clean power light not ON.

[Asere]

Guys I have a Monster Power Reference Protector and it's about 12 years old. All the lights are on except the clean power light.
Does this mean it's not doing any filtering?
Also does anyone know if those lights have a fuse that went out?

 

[Sonnie Parker]

I am not familiar with that unit. Have you check the user manual on this? It should tell you.

 

[Asere]

I am not familiar with that unit. Have you check the user manual on this? It should tell you.

The user manual is bare bones. I ended up removing the top and in looking inside there are no fuses and nothing looks burnt. I will call Monster tomorrow and ask. Thanks!

 

[Stumpy]

Have you figured anything out on this? I am in the same position.

Thanks!

 

[Asere]

Have you figured anything out on this? I am in the same position.

Thanks!

Yes, our units are working perfectly fine.
Per Monster Customer Care this was their reply:
The blue “Clean Power” LED is purely aesthetic and tends to burn out faster than the other LEDs on your surge protector. If you are getting power to the outlets, the unit is still functioning properly.

 

[Stumpy]

Thank you for the input.

 

[Asere]

Thank you for the input.

Sure, anytime! I sure miss the blue light though lol.

 

[Tony V.]

thats not saying much about the build quality of those units. An LED should last many, many, many years.

 

[Erroric]

I have the same thing with both my Monster Power 2600 MKii’s. First the Blue LED’s went out followed by yellow and red. I figure they lasted more than 12 years while on at all times... that’s over 105,000 hrs. I’d say it’s acceptable quality. Generally we end up upgrading equipment prior to reaching 12 years. But it’s an attractive power filter.