Is my Room Treatment doing anything.

daverich4

Registered
Thread Starter
Joined
Apr 21, 2026
Posts
2
More  
Preamp, Processor or Receiver
Audio Research Ref 6
Main Amp
Audio Research Ref 75 SE
DAC
PS Audio Directstream
Music Server
M4 Mac mini
Front Speakers
Wilson Audio Sasha ll
Cables
Wire World
For years I've had a pair of GIK Bass Traps in the front corners of my listening room as well as a set of RoomTune panels on either side. The panels on the side were placed using a mirror. I've recently contacted GIK to discuss additional room treatment and they've suggested several additions to what I have. Before ordering anything from them I decided to measure my room with and without my current treatments. I expected to see some difference in the measurements but there doesn't seem to be much. I'm still learning REW so it's possible I've done something wrong. I have both E-Books by Keith_W as well as a number of other sources of information but I am still a newbie. Would it be possible for someone to take a look at this .mdat to see if I've made a mistake or just as likely, am misinterpreting the graphs? Thanks. (If I'm presenting this wrong in some way please let me know so I can correct it.)
 

Attachments

  • Treatment test with targets 2.mdat
    Treatment test with targets 2.mdat
    1.4 MB · Views: 9
  • Room Treatment Tests.jpg
    Room Treatment Tests.jpg
    404.4 KB · Views: 13
  • Listening Room.jpg
    Listening Room.jpg
    108.3 KB · Views: 14
  • Room.JPG
    Room.JPG
    588.9 KB · Views: 15
Two bass traps and two wide band absorbers in your room won't measure as much... Basic rule of thumb is that one quarter to one third of the entire surface area of the room needs traps, absorbers and diffusers... You can get away with less if your use some form of Digital Room Correction DSP... I always suggest Physical Room Correction first then add DRC...
 
Two bass traps and two wide band absorbers in your room won't measure as much... Basic rule of thumb is that one quarter to one third of the entire surface area of the room needs traps, absorbers and diffusers... You can get away with less if your use some form of Digital Room Correction DSP... I always suggest Physical Room Correction first then add DRC...
Thanks for the response. GIK has suggested quite a bit more treatment for my room so perhaps that will make more of a difference. I use Focus Fidelity to make my convolution filters and the room measurements look quite a bit better with those in use. I just had never made before and after measurements with my limited room treatments.
 
Back
Top