Filter Generation Error

vego99

Member
Thread Starter
Joined
Jul 8, 2018
Messages
21
Can anyone guide me why this error is happening?

The filter creation fails only when I am outputting a 352.8khz filter type.

It almost seems as if the error is target specific.

Any guidance will be very helpful.

Thanks
Screenshot 2024-02-02 at 11.26.20 AM.png
 

vego99

Member
Thread Starter
Joined
Jul 8, 2018
Messages
21
I will look into it next week.
Hey Bernt,

Did some more testing and i dont know why this is occuring. I had filter generated that failed in 352.8 then changed the xover width slightly then it was able to save the filter approprately, ( though not preferred).

Not sure if this helps but wanted to pass along the information.

Let me know if you need the measurement and/or correction specs to test.
 

juicehifi

Audiolense
Staff member
Joined
Feb 5, 2018
Messages
690
I already have looked into it and didn't see the problem here. I need an exact configuration (measurement, setup, target, correction procedure) tthat triggers this problem to fix it.
 
Top Bottom