Feature Requests(+Tips/Specs) for easier Room Treatment - Moving generate RT60; Displaying Tolerances in the RT60 Menu; Displaying Impulse Thresholds

[Plompudu]

I've got a few feature request to increase the ease of use in most of my use-cases (hope this is the right place for it^):

1. Moving the Generate RT60 Decay button to the calculate RT60 Model button so that I don't have to go from one menu to the next when generating the RT60 Model.
Another Option would be Merging the buttons when pressing the calculate RT60 Model button so that it generates and calculates instead of being greyed out.

2. Option to display tolerances in the RT60 Menu for the RT60 measurements based on room size, factor (standard: 0.25 as per EBU spec.) and tolerances in percent or ms, so that it's easier for me to recommend/figure out the right absorption type for the room:

tech.ebu.ch/docs/tech/tech3276.pdf, /www.youtube.com/watch?v=G0ekssXX7rE&t=1812s (can't post as links since I'm new to this forum):

3. Option to display audibility thresholds of reflections, image shifting threshold, ... in the Impulse response tab to figure out easier what treatment should be used and where to place it:

Hope the pictures and specs also help others to better treat their room

 

[John Mulcahy]

Most of these are on the to-do list. I've made a change in the latest beta build so that generating the RT60 decay graph also runs the model fit, it's more difficult to do the other way around.

 

[Plompudu]

Most of these are on the to-do list. I've made a change in the latest beta build so that generating the RT60 decay graph also runs the model fit, it's more difficult to do the other way around.

Amazing!
Thanks a lot for your hard work and for providing such an amazing Tool!

 

[John Mulcahy]

The next beta build:

 

[Plompudu]

The next beta build:

View attachment 84194

This looks great!

I'd like it if we could set the Factor and the Tolerance used in the T_m Formula in the drop down menu as well, if we want to use something other then the EBU Specification.
Would be nice if we also could use % instead of ms for the tolerance if you implement it

 

[John Mulcahy]

In beta 87, just uploaded, the nominal RT60 is 300 ms. I have made it adjustable for the next build, and added the limits feature on the overlay RT60 graph. The tolerance has to be in the same units as the RT60 graph.