"Drop filters...." is off. Please see attached. Before generating filters, please select "miniDSP 2x4 HD" and set target level to 90 db. There is no room curve.
BTW, "miniDSP-96K" is always initially selected, even though in eq. preferences eq. is set to "miniDSP 2x4 HD".
Also, match range is 30-140, individual max boost 4db, overall max boost 0db, flatness target 3db, allow narrow filters and vary max Q both are on. Thanks.
If you select Drop small filters the zero gain filters will be removed. I'll make a change for the next 5.20.14 early access build so filters with zero gain are removed regardless.
The Equaliser preference is only applied for new measurements. Once a measurement has been made it remembers its equaliser selection and the selection can be changed in the EQ window. The measurement would need to be saved to make that change persistent.
If Drop filters if gain is small is selected any Automatic filters which have gain of magnitude less than half the flatness target at the end of the optimisation process will be freed up (their Type will be set to "None")
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.