thothsong

See that post for the outline of an approach.

Others have had success with a specific Lenovo adapter, see that post and that post.

Nice job!

I guess I'm blind, as I don't see any window in your photos, only the glass doors. String and painters tape can work as well as a...

I'm confused that you reference a window about first reflections? First reflections on the sides look to me to be more like the...

You could try taking 0-degree measurements close to each speaker to see if the IRs are cleaner.

Probably hard to answer without knowing physical constraints. As an example, I'd remove that bench in front of the couch, and see if...

The 118 Hz isn't ringing, it's hum from some sort of equipment. 118 Hz is 7080 RPM, which is the nominal speed for some kinds of motors...

Yes, Sound eXchange. And you don't use the Java output driver in this case. There's more than one way to accomplish it, and I don't...

Those 2 new sets of measurements are pretty consistent with each other, with two differences that I see. With the shaker platform...

In no way disagreeing, if you want to compare actual simultaneous output against the trace arithmetic, use the Generator to generate the...

Hard for me to imagine anything about the room configuration that would cause that kind of SPL disparity in just the Center channel. If...

There's something very odd about the measurements. Left and Right channels pre-riser are indeed ~6 dB higher than with the riser, but...

REW build shouldn't matter for uploads. File too large? For some reason the distortion has gone up, and the Clarity metrics have gone...

I only see measurements with the riser.