Audiolense 2.0 Trail Version

rdalem

Registered
Thread Starter
Joined
Nov 29, 2022
Messages
7
More  
Preamp, Processor or Receiver
RME Fireface UCX
Streaming Equipment
Roon
Are all the functions in the trail version in AL 2.0 available? The plan is to implement 2 subwoofers in a stereo system using UMIC 1 and an RME card. I have plans to buy AL XO for a 3 way project a little later.
 

juicehifi

Audiolense
Staff member
Joined
Feb 5, 2018
Messages
575
The demo lets you listen to regular stereo correction …. 90 seconds of corrected music if you have music on wav-files available.

Audiolense 2.0 does frequency correction in 2 channels. You need XO or surround to include a sub or two. I recommend XO.
 

rdalem

Registered
Thread Starter
Joined
Nov 29, 2022
Messages
7
More  
Preamp, Processor or Receiver
RME Fireface UCX
Streaming Equipment
Roon
The demo lets you listen to regular stereo correction …. 90 seconds of corrected music if you have music on wav-files available.

Do you mean xo by demo?
 

rdalem

Registered
Thread Starter
Joined
Nov 29, 2022
Messages
7
More  
Preamp, Processor or Receiver
RME Fireface UCX
Streaming Equipment
Roon
Then I am busy measuring, making a target and creating a filter that the Roon convolver can use. I only use Stereo correction now to get to know AL. It turns out that I have a big difference on the right and left channel.

My question this time is delay related. Is it the case that delay 0.00 is the starting point and the other channels are adjusted based on this?
 

juicehifi

Audiolense
Staff member
Joined
Feb 5, 2018
Messages
575
Delay 0 is the arrival of the driver with the least delay.
 
Top Bottom