Channel setup

Labdoc · Friday at 3:38 PM

Newbie question. On Audiolense XO 7.5, I am trying to setup to create and measure a 6.2 digital crossover system. On each side, there is a Subwoofer, Woofer, Mid-range and Tweeter channel with a dedicated amp channel on each output.. Input to each channel is via a RME ADI-2 pro fs be with 8 channels output using ASIO. The channels are connected as:
0,1 Left, Right subs
2,3 L, R woofers
4,5 L,R mids
6,7 L,R tweeters

I cannot see how to enter this setup into the Audiolense channel measurement setup interface. Help please.

juicehifi · 2025-12-27T03:31:10-0600

You can override the input assignments in the measurement module.

Labdoc · 2025-12-27T05:31:26-0600

Berndt, that is what I understood from Mitch's walkthrough article from several years ago and in the manual. However, I cannot find where I can re-assign the output channels. Can you post a screen shot?
Murray

juicehifi · 2025-12-27T11:02:21-0600

I am at my phone now, so no screendump.

Just press «new measurement» and edit the outputs as you want. The numbers in the left side…

Labdoc · 2025-12-27T12:41:06-0600

Found it! It is in Edit Speaker Setup.
Setup 6.2
Edit speaker setup
Remove all speakers
Speaker 0 remains
Add speaker 1 as Custom
Remove speaker 0
Continue to add custom speakers. Set crossovers and routing according to your system. For starters, I am using the manufacturer settings for the original passive XO, now removed: 70, 380 and 3500

Screen shot attached.

juicehifi · 2025-12-27T13:30:43-0600

That works too, but it requires more manual work. Be diligent about defining the play back formats properly.

Channel setup

Labdoc

Registered

juicehifi

Audiolense

Labdoc

Registered

juicehifi

Audiolense

Labdoc

Registered

Attachments

juicehifi

Audiolense

Popular tags