umik 1

[chips33]

Hi! Ive Been using rew for a while now and no matter what i do it cant com with my umik 1 what should i do? It dosent seem to work on Windows 10 at all

mattias

 

[AustinJerry]

There is a guide that describes how to set up USB mic's for use with REW for laptops with HDMI connections. The mic works perfectly fine with Win10.

Getting Started with REW

 

[Frank PALM]

Thanks for posting the updated version of the REW 101. I had been using the 2017 version. Still one of the best guides.

 

[unclecomfort]

Hi Jerry, do you have the latest iteration of the minidsp guide too?

 

[chips33]

There is a guide that describes how to set up USB mic's for use with REW for laptops with HDMI connections. The mic works perfectly fine with Win10.

Getting Started with REW

It works fine on Java but not on asio and im not sure where i pick the subwoofer on java

 

[AustinJerry]

Hi Jerry, do you have the latest iteration of the minidsp guide too?

https://www.minidsp.com/support/community-powered-tutorials

 

[AustinJerry]

It works fine on Java but not on asio and im not sure where i pick the subwoofer on java

As for not working with ASIO, does your laptop support HDMI? If yes, it might be worth following the ASIO trouble-shooting section in the REW guide. Using ASIO is much more useful than using Java, and it works fine under Win10.

As for measuring subs using the Java drivers, recall that with bass management in your AVR, low frequencies below the crossover are routed to the subs. So, to measure subs by themselves, send the REW measurement sweep to either the left or right channel and disconnect that speaker's cable. This allows you to isolate the sub(s). Measure 15-300Hz.