Many people use this program for combining front + sub 2.1 or 5.1 or 7.1 or 7.2 and beyond. My system is 2-viter 2-mid and 2 sub. Just like you, only the crossover frequency is different. I have a question. Why when I measure mid (I dissolve the crossover in the entire 20-20000Hz band.) In the 400-800Hz band, the delay is -1.4ms. The same speaker 400-1500Hz delay -0.8ms.
The question is why is that? A speaker at a lower frequency should have a longer delay, but here it is vice versa. You can take a quick measurement of any one speaker with the same settings and check if this is so. Thanks.
The question is why is that? A speaker at a lower frequency should have a longer delay, but here it is vice versa. You can take a quick measurement of any one speaker with the same settings and check if this is so. Thanks.