The clock adjustment is too large...

[meisterrp]

Hello everyone,

can someone help me with this error?

thx

 

[John Mulcahy]

You will still get a measurement, but REW will not have applied clock rate correction to it. Can you attach the mdat you get, or email it to the feedback@roomeqwizard.com address?

 

[meisterrp]

Thanks for the help.

 

[John Mulcahy]

There's a lot of variation of the clock adjustment in those measurements, which should not happen. Do the sweeps play back smoothly without any crackles or glitches?

Your LFE measurement is very noisy because it was measured 20 Hz to 20 kHz, use a lower end frequency for LFE measurements, e.g. 250 Hz. In the options on the Measure dialog you can have REW do that for you automatically.

 

[meisterrp]

The sweeps playing smoothly without any crackles or glitches.

 

[John Mulcahy]

In C:\Program Files\REW you could try replacing the csjsound_amd64.dll file with the one from this post. If that doesn't help a user reported that running the installer again and turning off hardware graphics acceleration helped his system. Not sure why that might be, but worth a try.

 

[meisterrp]

Thanks for the help. But unfortunately it didn't help.

 

[meisterrp]

Hello everyone,

i have now been able to solve the problem. It was actually an outdated HDMI cable.
So, for people with similar problems, look for the HDMI cable.