StormAudio measurement count

[jevansoh1]

Hi John,

I was wondering if you could alter the StormAudio selection to use all 20 EQ points the StormAudio units are capable of as right now it's only using 12 points max and I'd love to get all 20 working.

Thanks,

--Jason

 

[John Mulcahy]

8 are reserved for the crossover filters.

 

[jevansoh1]

I'm sorry, I don't understand. I can do a measurement, get 12 results, then remeasure with the applied 12 and then apply up to 8 more by doing it twice like that, but that is tedious and time consuming. I can easily use all 20 for regular EQ and do so all the time. Am I misunderstanding what you're saying, John? Thanks for your reply, BTW.

 

[John Mulcahy]

The equaliser supports 20 biquads, but if a crossover filter is selected that can use up to 4 biquads. The implementation allows two crossover filters so they could require up to 8 biquads. REW doesn't support having a variable number of filters depending on what filter types have been selected, so 8 slots are permanently reserved for the crossover filters.

 

[jevansoh1]

Ok, John. Thanks for explaining the situation. I understand now. I wish there was a way to say I'm not using any crossover's so please use 20 biquads, though. Thanks again for all you do.

 

[John Mulcahy]

I can add an EQ only option in the next build that has 20 filters, but I don't know if the StormAudio code will import that successfully.

 

[jevansoh1]

That would be wonderful, John, if it isn't too much trouble I'd appreciate it so very much. I think it will work but if not, at least we'll know and I'll be the first to tell you. Thanks buddy.