Leo11
Registered
Thread Starter
- Joined
- Jul 23, 2022
- Posts
- 37
More
- Main Amp
- Hypex NC252MP
- Additional Amp
- Hypex NC502MP
- DAC
- Motu Ultralite Mk5
- Computer Audio
- Dell notebook
- Streaming Subscriptions
- Amazon Music Unlimited
- Front Speakers
- NHT C3
- Subwoofers
- 2x 12" DIY Scan Speak acoustic suspension
Dear users,
I am trying to make good measurements to establish the correct room correction approach.
REW has a great guide and explains well each option, but despite this, I am struggling to understand what is the best setting for the spectrogram.
In particular, I can't figure out when to use the Morlet and Airy CWT, and which is the best PPO, and resolution settings.
I see that between the various wavelet modes the peak energy time and the magnitude of reflections change relatively much.
On the web alas there is practically no useful information ...
Any advice?
Thanks
I am trying to make good measurements to establish the correct room correction approach.
REW has a great guide and explains well each option, but despite this, I am struggling to understand what is the best setting for the spectrogram.
In particular, I can't figure out when to use the Morlet and Airy CWT, and which is the best PPO, and resolution settings.
I see that between the various wavelet modes the peak energy time and the magnitude of reflections change relatively much.
On the web alas there is practically no useful information ...
Any advice?
Thanks
Last edited:
