e1guapo
New Member
Thread Starter
- Joined
- Mar 7, 2022
- Posts
- 16
More
- Other Amp
- Drop THX AAA 789
- DAC
- Merging+Anubis, Denafrips Ares II, SPL Phonitor One d
- Computer Audio
- HQPlayer Embedded / Desktop, Roon
- Streaming Equipment
- iFi ZEN Stream
- Streaming Subscriptions
- Qobuz, Tidal, Apple Music
- Front Speakers
- PreSonus E5 XT
- Center Channel Speaker
- PreSonus E44
- Surround Speakers
- PreSonus E3.5
- Rear Height Speakers
- PreSonus E3.5
- Subwoofers
- PreSonus E8
- Other Speakers
- Sennheiser HD820, HD650, Beyerdynamic DT880 Pro
- Other Equipment
- Audiolense XO, SoundID Reference
Dear all,
In the near future I'll probably have a case for a medium-size Dolby Atmos listening room. Screenshot is the speaker layout for arrayed Dolby Atmos 9.1.6 (Ls, Rs, Lrs and Rrs are using 3 speakers as one channel, for example). I plan to use ALXO to generate the best FIR filter for it. But it seems like ALXO won't allow me to make the speaker array. I tried "Driver overlap" function in the XO setup page but it doesn't make sense to me (the main purpose of this function is for digital crossover). And also the speaker description / channel sequence cannot match the Dolby Atmos layout. Even worst the channel count is insufficient (in this case, 32 channels). How to make it happen in ALXO? Please advise...
In the near future I'll probably have a case for a medium-size Dolby Atmos listening room. Screenshot is the speaker layout for arrayed Dolby Atmos 9.1.6 (Ls, Rs, Lrs and Rrs are using 3 speakers as one channel, for example). I plan to use ALXO to generate the best FIR filter for it. But it seems like ALXO won't allow me to make the speaker array. I tried "Driver overlap" function in the XO setup page but it doesn't make sense to me (the main purpose of this function is for digital crossover). And also the speaker description / channel sequence cannot match the Dolby Atmos layout. Even worst the channel count is insufficient (in this case, 32 channels). How to make it happen in ALXO? Please advise...
