Sewing Room Setup

3dbinCanada

Moderator
Thread Starter
Joined
Dec 29, 2020
Posts
1,682
More  
Preamp, Processor or Receiver
Yamaha RX-A3060, RX-V1900, RX-V1075
Universal / Blu-ray / CD Player
Yamaha BD-S681, Sony UBP-X800, Oppo BDP-83
Streaming Equipment
BlueSound Node2i
Front Speakers
PSB Image T65, PSB Century 800, PSB Century 300
Center Channel Speaker
PSB Image 8C, PSB Century200, PSB Century 100
Surround Speakers
PSB Image 1B, RBH A600, PSB Alpha Minis
Surround Back Speakers
PSB Image 1B
Subwoofers
Rythmik LV12-R, PSB Subsonic 6, PSB Subsonic 5
Video Display Device
UN65KU6491 65"/UN55MU7000 55"/UN50MU7100 50"
Remote Control
Logitech Harmony 650
The sewing room was my late wife's happy spot. It is now where the new Ultimea soundbar set up resides when its not in active duty at the trailer/cottage.

I decided to break out REW and run some measurements of the new soundbar and trying different locations for the sub. Guess what?? The sub location was changed.

The measurement setup

IMG_8569.jpg
IMG_8568.jpg


The sub location before the measurement. Located on the back wall right hand side of the bed.

IMG_8549.jpg



New sub location is located on the front wall right (same wall as the soundbar) in the corner under the desk.

IMG_8590.jpg
IMG_8591.jpg


The results. I'm not sure if the new sub location (purple trace) is better than the original sub location (red trace) It has a smoother wider response between 20 and 55 Hz but drops off faster at 60 Hz.

Before - After Sub Relocation.jpg
 
Last edited:
Back
Top