RTA/MMM Setting

tjcinnamon

Member
Thread Starter
Joined
Dec 6, 2020
Messages
133
Is it possible to have a small delay for the MMM measurement so I can start “rotating” it before it starts measuring?

Also, is it possible to have it automatically stop at a predetermined number (100 for example).
 

tjcinnamon

Member
Thread Starter
Joined
Dec 6, 2020
Messages
133
There is always a delay from starting RTA capture before averaging starts to allow for buffers to fill properly. Generally best to stop when the response stops changing.
The reason I ask is because I do my measurements solo and it's difficult to continue to hold/rotate the mic while turning it off.
 
Top Bottom