tjcinnamon

The reason I ask is because I do my measurements solo and it's difficult to continue to hold/rotate the mic while turning it off.

There is always a delay from starting RTA capture before averaging starts to allow for buffers to fill properly. Generally best to stop...

That makes sense. Can windowing be used for nearfield and would that solve my problem. I’m trying to closely align some drivers as...

WOW!!! This repeated measurement feature just saved me a ton of time. 6 subs, 2 mains, 3 positions... 24 measurements went about 3...

Is it possible to have a small delay for the MMM measurement so I can start “rotating” it before it starts measuring? Also, is it...

Thank you! Unfortunately the speaker and mic are about 1m away from room surfaces. Does that narrow down a value between 1/3 and 1/12?

Generally better making full range measurements where possible. For a good result down to 500 Hz you would typically need the right...

Thank you all.

I want to measure a speaker from 2m away from 500Hz to 5000Hz. What’s the best FDW setting I can use to negate reflections? Also...