STucker
New Member
Thread Starter
- Joined
- Nov 11, 2024
- Posts
- 14
More
- Preamp, Processor or Receiver
- Denon AVR x4400H
- Universal / Blu-ray / CD Player
- Samsung UBD-K8500
- Streaming Equipment
- Roku Ultra
- Streaming Subscriptions
- Prime Video
- Front Speakers
- Ascend Acoustics CBM-170 SE
- Center Channel Speaker
- Ascend Acoustics CMT-340c
- Surround Speakers
- Ascend Acoustics HTM-200 SE
- Front Height Speakers
- Definitive Technology 800
- Rear Height Speakers
- Definitive Technology 800
- Subwoofers
- Dual Rythmik Audio FVX15
- Video Display Device
- 65 inch Vizio LCD TV
- Other Equipment
- mini-DSP 2x4 HD
PLEASE IGNORE the post below.
Hello, I did several measurements of my left and right Ascend CBM-170 speakers and for some reason the frequencies above 7000HZ are non-existant. There also isn't any measurements for frequencies up to 80 HZ where I have the crossover set. There isn't anything between the speakers and the MLP where my UMIK is positioned. I attached one of the measurements. Any ideas or suggestions on what I can to do fix these problems?
Also, I have a very odd shaped room without any acoustic treatments for now. Is my interpretation of the graph correct in that I don't have a problem with RT60 decay
Thanks,
Steve T
Hello, I did several measurements of my left and right Ascend CBM-170 speakers and for some reason the frequencies above 7000HZ are non-existant. There also isn't any measurements for frequencies up to 80 HZ where I have the crossover set. There isn't anything between the speakers and the MLP where my UMIK is positioned. I attached one of the measurements. Any ideas or suggestions on what I can to do fix these problems?
Also, I have a very odd shaped room without any acoustic treatments for now. Is my interpretation of the graph correct in that I don't have a problem with RT60 decay
Thanks,
Steve T
Last edited:
