REW setup with UMIK-1 time alignment with no HDMI

[Harrycr]

Hi can someone please help or direct me to the setup.

Thanks

 

[ddude003]

Without much information about your system... Have a look at the Generator function... Create a sweep with timing, save to a .wav file... Copy to a usb jump stick and/or play the .wav file through your kit... See https://www.roomeqwizard.com/help/help_en-GB/html/siggen.html...

 

[Harrycr]

Thanks for your reply.
I have a Yamaha Z9 which doesnt have provision for HDMI.
I have UMIK-1 and a laptop that has a headphone type connection.

Can I still use the time alignment tool?

 

[JStewart]

Can I still use the time alignment tool?

Create a sweep with timing, save to a .wav file... Copy to a usb jump stick and/or play the .wav file through your kit...

Yes and perhaps the easiest way is if you have a source connected to your Z9 that can play a multichannel wave file created in REW as @ddude003 suggested.

If not, what is it you wish to align? Typically it’s subs to mains.

 

[ddude003]

Thanks for your reply.
I have a Yamaha Z9 which doesnt have provision for HDMI.
I have UMIK-1 and a laptop that has a headphone type connection.

Can I still use the time alignment tool?

Your welcome... It looks like your Z9 has no USB or Ethernet capability either... Yes, you could use your headphone _stereo_ out from your laptop as a last resort...