PGS4038
Member
Thread Starter
- Joined
- May 22, 2019
- Posts
- 13
More
- Preamp, Processor or Receiver
- Bryston BP16 with MM and DAC
- Main Amp
- Bryston 4BSST
- Universal / Blu-ray / CD Player
- CD Cambridge Audio as transport
- Streaming Subscriptions
- Thorens TD160 ii/ AT95E /
- Front Speakers
- Harbeth M30
- Subwoofers
- 2 of B&W ASW750
- Other Speakers
- Bryston 10B crossover, Behringer DEQ2496
I've recently had to replace the amplifier in a B&W ASW750 sub, due to unreliability.
I asked B&W for the TS parameters of the driver in my ASW750 sub, as I was changing their amplifier for a Hypex FA501. I'm still awaiting their reply
. I ended up running REW and inputting my interpretation of the results into the Hypex DSP with their software.
I've achieved a reasonable result by trial and error, but it would have been so much easier if REW talked to the DSP in the Hypex amplifier.
I asked B&W for the TS parameters of the driver in my ASW750 sub, as I was changing their amplifier for a Hypex FA501. I'm still awaiting their reply
. I ended up running REW and inputting my interpretation of the results into the Hypex DSP with their software. I've achieved a reasonable result by trial and error, but it would have been so much easier if REW talked to the DSP in the Hypex amplifier.
