request for interpretation of measurements

rawracer

Registered
Thread Starter
Joined
Aug 7, 2024
Posts
4
Measurements done, but reading is not so easy. Currently (based on these measurements) the room is a bit cluttered. This is not the intended room, but I listened to it for a long time and with different equipment and I would like someone with experience in this matter to say something more.


It gives links to REW .mdat files on Google drive for downloading.

Left Chanel

Right channel

Left + right
 
Last edited by a moderator:
I have made your links functional but they require access permission, you should replace them with public links.
 
Or, you can upload the .mdat files here, Look for the "attach files" button below the box where you enter text.

Regards,
Wayne
 
Your measurements look normal for most rooms. By and large everything is fine. I would find out why there is a peak at 4 kHz. At 70 Hz the right and left sides have a conflict. Room, or speaker placement. From 180 to 300 Hz there is also a conflict between right and left. For the same reason.
 
thank you for your reply. Currently, the right corner of the room from the listening position is a bit disturbed. The new columns are in large boxes and I will put them in only when the currently used ones are sold. the right column is closer to the side wall, so its characteristics are probably different. In the new room it will be a bit different. I will definitely let you know here on the forum and ask for advice on adaptation.
 
Back
Top