Pseudo anechoic speaker measurements.

aceinc

Registered
Thread Starter
Joined
May 21, 2017
Messages
12
I would like to approximate an anechoic speaker measurement from 200hz to 20khz in an 11'x15' room. To do this I assume I would need to do gated measurements. Within REW, I believe gating is controlled via the IR panel which I have never used. Could someone explain what a good set of values for this panel would be for the measurement & environment I have defined.

Also if you could provide a brief explanation why the values were chosen, and if I should be setting other parameters.

If this has already been explained elsewhere, please provide a link.
 

JStewart

Senior AV Addict
Supporter
Joined
Dec 5, 2017
Messages
2,040
Location
Central FL
There is thread here which may also help you. IIRC the method has aligned to Klippel NFS measurements quite well.

 
Top Bottom