Hello from Warsaw Poland!

[kapoost]

Hi from Warsaw Poland!

First of all - thank you for being here and creating such an inspiring community!
I'm kind of newbie in audio world. Currently listening to music on:

• Hifiberry DAC+ DSP with linear power source
• Sansui AU-11000A Integrated Amp
• Kelly KT2 or Tannoy R3 Speakers (QED wiring)
• DIY power filter & power wire

I'm kind of happy with my results (especially after few hours of 'testing') but... I think I might be doing something wrong - my filtered signal is much lower than original. As a countermeasure I'm setting higher volume on my amp but is it optimal way? Theoretically - the lower is my input signal the bigger signal/noise ratio... The bigger amplification - the bigger THD... Or am I just thinking too much?

My lines results like this:

My filter file:

Filter Settings file​

​

Room EQ V5.19​

Dated: Jan 14, 2020 7:00:46 PM​

​

Notes:​

​

Equaliser: Generic​

Average 1​

Filter 1: ON PK Fc 365 Hz Gain -13.5 dB Q 1.000​

Filter 2: ON PK Fc 1003 Hz Gain -9.7 dB Q 1.000​

Filter 3: ON PK Fc 15057 Hz Gain -11.1 dB Q 1.154​

Filter 4: ON PK Fc 7336 Hz Gain -10.2 dB Q 1.389​

Filter 5: ON PK Fc 175 Hz Gain -12.5 dB Q 2.000​

Filter 6: ON PK Fc 10338 Hz Gain -2.2 dB Q 1.000​

Filter 7: ON PK Fc 2423 Hz Gain -5.8 dB Q 2.498​

Filter 8: ON PK Fc 70.9 Hz Gain -4.7 dB Q 2.126​

Filter 9: ON PK Fc 219 Hz Gain 7.0 dB Q 5.000​

Filter 10: ON PK Fc 120 Hz Gain 6.8 dB Q 7.359​

Filter 11: ON PK Fc 343 Hz Gain -3.6 dB Q 4.707​

Filter 12: ON PK Fc 1594 Hz Gain 3.3 dB Q 4.983​

Filter 13: ON None ​

Filter 14: ON None ​

Filter 15: ON None ​

Filter 16: ON None ​

Filter 17: ON None ​

Filter 18: ON None ​

Filter 19: ON None ​

Filter 20: ON None ​

Please, let me know what do you guys think. I'll be experimenting a lot but your suggestions are more than welcome!


Cheers!

 

[mechman]

Welcome to AV NIRVANA! Unfortunately I'm the video guy so I'm not all that adept at REW. You may want to post your questions here.

 

[kapoost]

Thank you Steve! I'll learn a little bit more and will be ready for asking questions

Cheers!

 

[Todd Anderson]

Welcome aboard, @kapoost!

 

[Mark C Flick]

Welcome to the forum.

 

[NBPK402]

Welcome to the forum!

 

[Sonnie Parker]

Good to have you with us... and those measurements look very nice.