Equipment Rack

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
5,148
Location
Alabama
More  
Preamp, Processor or Receiver
StormAudio ISP Elite 24 MK3 Processor
Main Amp
McIntosh MC1.25KW Monoblock Amps
Additional Amp
StormAudio PA 16 MK3
Computer Audio
Intel NUC w/ Roon ROCK
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player (for media discs)
Front Speakers
RTJ 410
Center Channel Speaker
MartinLogan Focus C-18
Front Wide Speakers
JTR Neosis 110HT
Surround Speakers
JTR Neosis 210RT
Surround Back Speakers
JTR Neosis 210RT
Front Height Speakers
JTR Neosis 110HT-SL
Rear Height Speakers
JTR Neosis 110HT-SL
Subwoofers
JTR Captivator 2400 x6
Other Speakers or Equipment
VTI Amp Stands for the Monoblocks
Video Display Device
Sony 98X90L
Remote Control
Universal MX-890
Streaming Equipment
Kaleidescape | FireCube | Lenova Carbon X1 and Intel NUC for Roon
Streaming Subscriptions
Lifetime Roon Subscription
Tidal
qobuz
Netflix
Amazon Prime
Satellite System
Dish Joey 4K
Other Equipment
Zero Surge 8R15W-1 | Salamander Synergy Equipment Stand
The equipment rack I have is really flimsy and it is not adjustable height between shelves. I'd really like to get something that is more stout and is more adjustable.

I've looked at Crutchfield and Audio Advisor... they have a lot of nice racks, but none are adjustable to very much extent. There may not be anything like what I'm looking for out there, but I could be missing it.

If not adjustable, perhaps 9" bottom shelf, 7" middle and 5" top. The ability to swap out various size shelves would be nice.

Anyone have any recommendations?

Here is my current rack... I adjusted the pic so you can tell what it looks like better.

37120
37121
 
Last edited:

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
5,148
Location
Alabama
More  
Preamp, Processor or Receiver
StormAudio ISP Elite 24 MK3 Processor
Main Amp
McIntosh MC1.25KW Monoblock Amps
Additional Amp
StormAudio PA 16 MK3
Computer Audio
Intel NUC w/ Roon ROCK
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player (for media discs)
Front Speakers
RTJ 410
Center Channel Speaker
MartinLogan Focus C-18
Front Wide Speakers
JTR Neosis 110HT
Surround Speakers
JTR Neosis 210RT
Surround Back Speakers
JTR Neosis 210RT
Front Height Speakers
JTR Neosis 110HT-SL
Rear Height Speakers
JTR Neosis 110HT-SL
Subwoofers
JTR Captivator 2400 x6
Other Speakers or Equipment
VTI Amp Stands for the Monoblocks
Video Display Device
Sony 98X90L
Remote Control
Universal MX-890
Streaming Equipment
Kaleidescape | FireCube | Lenova Carbon X1 and Intel NUC for Roon
Streaming Subscriptions
Lifetime Roon Subscription
Tidal
qobuz
Netflix
Amazon Prime
Satellite System
Dish Joey 4K
Other Equipment
Zero Surge 8R15W-1 | Salamander Synergy Equipment Stand
I found the following Salamader unit... their Archetype System. It uses threaded rods as post, which I'd have to cut to length since they only come in 20" and 28" and I need about 22-24". I can buy an extra shelf.

The black is MDF painted, so not sure about whether I want to go that route. Might be too easy to chip depending on how well they coat and finish it. I do have a lot of brown in my room, so the walnut might look okay, and those shelve are solid wood.

37321
37322
 

jdubs75

Moderator
Staff member
Joined
Mar 6, 2018
Messages
254
Location
Illinois
More  
Preamp, Processor or Receiver
Marantz AV10
Main Amp
Emotiva XPA-7 Gen3
Additional Amp
Emotiva XPA-5 Gen3
Universal / Blu-ray / CD Player
Panasonic DP-UB9000
Front Speakers
Revel PerformaBe F228Be
Center Channel Speaker
Revel PerformaBe C426Be
Surround Speakers
Atlantic Technology IC-8.3
Surround Back Speakers
Atlantic Technology IC-8.3
Front Height Speakers
Revel C763L
Rear Height Speakers
Revel C763L
Subwoofers
JTR CAP 4000ULF-LP, JTR CAP 4000ULF-ST
Video Display Device
JVC DLA-NX7
Screen
Stewart StudioTek 130 G3 123"
Remote Control
Logitech Harmony Elite
Streaming Equipment
Amazon 4K Firestick, Sony PS4, Apple TV 4k
Streaming Subscriptions
Netflix, Amazon Prime, Apollo
Other Equipment
Furman AC-215A, Monster MP HTS 5100, MiniDSP 2x4 HD
Hi Sonnie- Have you considered using a 19” rack and shelves such as Middle Atlantic? They make shelves for whatever RU size you require making it very custom. I’m extremely happy with my set up and it’s great to know I can make adjustments for whatever components I change and or add in the future.
 

Kal Rubinson

Active Member
Joined
Nov 6, 2017
Messages
256
Location
NYC
I have Salamander Synergy racks in both systems. I use a tall, narrow one in the corner for the A/V system and a counter-height, double-wide one for the music system. They are really sturdy and strong and the shelves are nearly infinitely adjustable. Although I've changed all my equipment since I bought them, they have been reconfigured (more than once) to suit the new stuff perfectly.
 

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
5,148
Location
Alabama
More  
Preamp, Processor or Receiver
StormAudio ISP Elite 24 MK3 Processor
Main Amp
McIntosh MC1.25KW Monoblock Amps
Additional Amp
StormAudio PA 16 MK3
Computer Audio
Intel NUC w/ Roon ROCK
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player (for media discs)
Front Speakers
RTJ 410
Center Channel Speaker
MartinLogan Focus C-18
Front Wide Speakers
JTR Neosis 110HT
Surround Speakers
JTR Neosis 210RT
Surround Back Speakers
JTR Neosis 210RT
Front Height Speakers
JTR Neosis 110HT-SL
Rear Height Speakers
JTR Neosis 110HT-SL
Subwoofers
JTR Captivator 2400 x6
Other Speakers or Equipment
VTI Amp Stands for the Monoblocks
Video Display Device
Sony 98X90L
Remote Control
Universal MX-890
Streaming Equipment
Kaleidescape | FireCube | Lenova Carbon X1 and Intel NUC for Roon
Streaming Subscriptions
Lifetime Roon Subscription
Tidal
qobuz
Netflix
Amazon Prime
Satellite System
Dish Joey 4K
Other Equipment
Zero Surge 8R15W-1 | Salamander Synergy Equipment Stand
I don't mind my mono amps sitting on the floor. The equipment I want to rack is the Emotiva Eleven at 8" tall, which would be on the bottom shelf, HTP-1 at 5.7" on the second shelf, and UB9000 at 3.25" on the third shelf, then I'd place my Roku and Dish Network boxes on top, side by side. I can't go too high or I'll be too close to interfering with my center channel speaker which is at 29". Max height needs to stay at about 26".

I also prefer an open rack, not enclosed, no back, sides or doors. The Synergy is much nicer than the Archetype.

The Synergy SU20 model would not work, and the 30 is too tall at 32" overall. The 20 only has 17.75" in between bottom and top, less the two shelves (I'd need an extra shelf) at 1.5" total. That leaves me with 16.25" and I need 16.95" just for the equipment, plus at least .5" for breathing on top (prefer an inch). I really need about 20" between bottom and top. They offered to cut the Archetype posts for me, so they might do the same on the Synergy.

37328
 

Kal Rubinson

Active Member
Joined
Nov 6, 2017
Messages
256
Location
NYC
The Synergy SU20 model would not work, and the 30 is too tall at 32" overall. The 20 only has 17.75" in between bottom and top, less the two shelves (I'd need an extra shelf) at 1.5" total. That leaves me with 16.25" and I need 16.95" just for the equipment, plus at least .5" for breathing on top (prefer an inch). I really need about 20" between bottom and top. They offered to cut the Archetype posts for me, so they might do the same on the Synergy.
Understood. I hope they will cut the columns to suit.
 

VinceHoffman

Member
Joined
Mar 20, 2020
Messages
68
Location
Ontario, Canada
More  
Preamp, Processor or Receiver
Anthem AVM60 or Coincident Statement Linestage
Main Amp
N/A
Additional Amp
2x Meridian 557 for Atmos
DAC
Hotrodded PS Audio Directstream DAC w/ outboard linear PS.
Universal / Blu-ray / CD Player
Oppomod UDP-203 & Jay's Audio CDT2 Mk II transport
Front Speakers
ATC SCM20ASL Pro mkII on Skylan 4 post stands
Center Channel Speaker
ATC SCM20ASL Pro mkII on Skylan 4 post stand
Surround Speakers
ATC SCM20ASL Pro mkII on Skylan 4 post stand
Front Height Speakers
ATC SCM12i Pro hung from K&M ceiling mounts
Rear Height Speakers
ATC SCM12i Pro hung from K&M ceiling mounts
Subwoofers
4x Seaton Sound Submersive HP
Other Speakers or Equipment
DSPeaker Anti-mode 2.0 for sub modal EQ & delay
Video Display Device
JVC DLA-990 & Isco 3L Ana-lens on motorized sled
Screen
Seymour Screen Excellence 4k 2.37:1 Motorized
Streaming Equipment
Apple TV 4k
Streaming Subscriptions
Apple+, CraveTV, Disney+, Netflix, and PrimeTV
Other Equipment
Oracle Delphi VI Reference/Turbo PS/SME V/Benz LP-S turntable, Foundation Research V5 phono-stage, & JL Audio CR-1 electronic subwoofer crossover
Hey Sonnie,

The Salamander Synergy racking is more substantial (and rigid) than their Archetype "Flexy" rack when the hardware is properly torqued together. I found red Loctite on the vertical column fixing bolts ensured that it stayed that way. Just be aware that the black painted MDF top and bottom plates mark up quite easily. A local higher end machine shop will have no problem custom cutting the 30" aluminum extrusions to length for you. Be aware though, that a rack frame made of welded tubing is much more rigid still.
 

gb1

Registered
Joined
Sep 28, 2020
Messages
6
Location
McMinnville, Oregon
More  
Preamp, Processor or Receiver
McIntosh MX 122
Main Amp
(2) McIntosh MC601
Additional Amp
Yamaha Mx A5000
Other Amp
McIntosh MP-100 phono
Computer Audio
Mac Mini
Universal / Blu-ray / CD Player
Sony BPDS360
Front Speakers
Magico S3
Center Channel Speaker
Infinity
Surround Speakers
Triad Silver
Surround Back Speakers
Triad Silver
Front Height Speakers
Triad Silver
Rear Height Speakers
Triad Silver
Subwoofers
(2) Rhythmik 18
Other Speakers or Equipment
ASC Wall Damp, (4) 16” x 8 ‘ ISO Thermal tube trap
Video Display Device
Sony 85 inch
Streaming Equipment
Sonos
Other Equipment
Hydra Alpha 6, VPI classic II turntable
i use a Timbernation maple rack. It’s more custom than audjustable
 

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
5,148
Location
Alabama
More  
Preamp, Processor or Receiver
StormAudio ISP Elite 24 MK3 Processor
Main Amp
McIntosh MC1.25KW Monoblock Amps
Additional Amp
StormAudio PA 16 MK3
Computer Audio
Intel NUC w/ Roon ROCK
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player (for media discs)
Front Speakers
RTJ 410
Center Channel Speaker
MartinLogan Focus C-18
Front Wide Speakers
JTR Neosis 110HT
Surround Speakers
JTR Neosis 210RT
Surround Back Speakers
JTR Neosis 210RT
Front Height Speakers
JTR Neosis 110HT-SL
Rear Height Speakers
JTR Neosis 110HT-SL
Subwoofers
JTR Captivator 2400 x6
Other Speakers or Equipment
VTI Amp Stands for the Monoblocks
Video Display Device
Sony 98X90L
Remote Control
Universal MX-890
Streaming Equipment
Kaleidescape | FireCube | Lenova Carbon X1 and Intel NUC for Roon
Streaming Subscriptions
Lifetime Roon Subscription
Tidal
qobuz
Netflix
Amazon Prime
Satellite System
Dish Joey 4K
Other Equipment
Zero Surge 8R15W-1 | Salamander Synergy Equipment Stand
Timbernation
Those are very nice racks for sure. My issue is I change out equipment too often to spend money on a fixed height rack.

Hey Sonnie,

The Salamander Synergy racking is more substantial (and rigid) than their Archetype "Flexy" rack when the hardware is properly torqued together. I found red Loctite on the vertical column fixing bolts ensured that it stayed that way. Just be aware that the black painted MDF top and bottom plates mark up quite easily. A local higher end machine shop will have no problem custom cutting the 30" aluminum extrusions to length for you. Be aware though, that a rack frame made of welded tubing is much more rigid still.
I like the Synergy a lot better and prefer it to the Archetype. Unfortunately we don't have any "high-end" machine shops around these parts. I wouldn't trust anyone other than myself or Salamander to cut them. I am pretty sure they will cut them for me. They offered to cut the threaded posts for $10 each post ($40). I am going to contact them on Monday.
 

VinceHoffman

Member
Joined
Mar 20, 2020
Messages
68
Location
Ontario, Canada
More  
Preamp, Processor or Receiver
Anthem AVM60 or Coincident Statement Linestage
Main Amp
N/A
Additional Amp
2x Meridian 557 for Atmos
DAC
Hotrodded PS Audio Directstream DAC w/ outboard linear PS.
Universal / Blu-ray / CD Player
Oppomod UDP-203 & Jay's Audio CDT2 Mk II transport
Front Speakers
ATC SCM20ASL Pro mkII on Skylan 4 post stands
Center Channel Speaker
ATC SCM20ASL Pro mkII on Skylan 4 post stand
Surround Speakers
ATC SCM20ASL Pro mkII on Skylan 4 post stand
Front Height Speakers
ATC SCM12i Pro hung from K&M ceiling mounts
Rear Height Speakers
ATC SCM12i Pro hung from K&M ceiling mounts
Subwoofers
4x Seaton Sound Submersive HP
Other Speakers or Equipment
DSPeaker Anti-mode 2.0 for sub modal EQ & delay
Video Display Device
JVC DLA-990 & Isco 3L Ana-lens on motorized sled
Screen
Seymour Screen Excellence 4k 2.37:1 Motorized
Streaming Equipment
Apple TV 4k
Streaming Subscriptions
Apple+, CraveTV, Disney+, Netflix, and PrimeTV
Other Equipment
Oracle Delphi VI Reference/Turbo PS/SME V/Benz LP-S turntable, Foundation Research V5 phono-stage, & JL Audio CR-1 electronic subwoofer crossover
We bought a huge 4 bay Synergy unit to house our great room and patio zone electronics almost 15 years ago. While Synergy doesn't scratch all my audiophile itches, with it's user configurable design, optional side panels, and optional lockable mesh front doors it was an eminently practical solution to our baby proofing needs at the time. Over time the gear collection housed within was streamlined while our physical media movie collection expanded. The rack was easily retrofit to accommodate these changes. I love the Synergy slide out Media Tray drawers. Six drawers accommodates about 500 movies in their cases.

Screen Shot 2020-11-28 at 2.21.52 PM.png
 

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
5,148
Location
Alabama
More  
Preamp, Processor or Receiver
StormAudio ISP Elite 24 MK3 Processor
Main Amp
McIntosh MC1.25KW Monoblock Amps
Additional Amp
StormAudio PA 16 MK3
Computer Audio
Intel NUC w/ Roon ROCK
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player (for media discs)
Front Speakers
RTJ 410
Center Channel Speaker
MartinLogan Focus C-18
Front Wide Speakers
JTR Neosis 110HT
Surround Speakers
JTR Neosis 210RT
Surround Back Speakers
JTR Neosis 210RT
Front Height Speakers
JTR Neosis 110HT-SL
Rear Height Speakers
JTR Neosis 110HT-SL
Subwoofers
JTR Captivator 2400 x6
Other Speakers or Equipment
VTI Amp Stands for the Monoblocks
Video Display Device
Sony 98X90L
Remote Control
Universal MX-890
Streaming Equipment
Kaleidescape | FireCube | Lenova Carbon X1 and Intel NUC for Roon
Streaming Subscriptions
Lifetime Roon Subscription
Tidal
qobuz
Netflix
Amazon Prime
Satellite System
Dish Joey 4K
Other Equipment
Zero Surge 8R15W-1 | Salamander Synergy Equipment Stand
That's a nice looking cabinet.

I had a custom built 3 column cabinet in the room at one time, but it was so aggravating having to get behind it to disconnect and reconnect equipment, so I've tried to stay single wide since. Granted it was a lot nicer for hiding cables and wires.
 

VinceHoffman

Member
Joined
Mar 20, 2020
Messages
68
Location
Ontario, Canada
More  
Preamp, Processor or Receiver
Anthem AVM60 or Coincident Statement Linestage
Main Amp
N/A
Additional Amp
2x Meridian 557 for Atmos
DAC
Hotrodded PS Audio Directstream DAC w/ outboard linear PS.
Universal / Blu-ray / CD Player
Oppomod UDP-203 & Jay's Audio CDT2 Mk II transport
Front Speakers
ATC SCM20ASL Pro mkII on Skylan 4 post stands
Center Channel Speaker
ATC SCM20ASL Pro mkII on Skylan 4 post stand
Surround Speakers
ATC SCM20ASL Pro mkII on Skylan 4 post stand
Front Height Speakers
ATC SCM12i Pro hung from K&M ceiling mounts
Rear Height Speakers
ATC SCM12i Pro hung from K&M ceiling mounts
Subwoofers
4x Seaton Sound Submersive HP
Other Speakers or Equipment
DSPeaker Anti-mode 2.0 for sub modal EQ & delay
Video Display Device
JVC DLA-990 & Isco 3L Ana-lens on motorized sled
Screen
Seymour Screen Excellence 4k 2.37:1 Motorized
Streaming Equipment
Apple TV 4k
Streaming Subscriptions
Apple+, CraveTV, Disney+, Netflix, and PrimeTV
Other Equipment
Oracle Delphi VI Reference/Turbo PS/SME V/Benz LP-S turntable, Foundation Research V5 phono-stage, & JL Audio CR-1 electronic subwoofer crossover
That's a nice looking cabinet.

I had a custom built 3 column cabinet in the room at one time, but it was so aggravating having to get behind it to disconnect and reconnect equipment, so I've tried to stay single wide since. Granted it was a lot nicer for hiding cables and wires.

Well hardwood floors and the stock adjustable glider feet make sliding the rack out from the wall and sliding it back a one man job. A spike rack not so much- LOL! Frankly I found the sonic benefits of spiked rack feet diminished as the weight of rack and gear increased. My custom sand loaded, sandbox equipped stainless steel, Corian, and carbon composite rack used for the "big rig" weighs 750+ pounds loaded with gear and I can still slide it out from the wall by myself on it's teflon loaded stainless adjustable industrial equipment feet.

Screen Shot 2020-01-04 at 8.36.30 PM.png
P1010337.JPG
 

ol_mcdonald

New Member
Joined
Mar 15, 2020
Messages
1
More  
Preamp, Processor or Receiver
Emotiva MC700
Main Amp
Crown XLi 1500
Additional Amp
Crown Xli 1500
Other Amp
Crown XLS2502
Universal / Blu-ray / CD Player
Sony UBP X800
Front Speakers
Klipschorn
Subwoofers
Peavey Low Rider in 9 cu ft ported enclosure
Other Speakers or Equipment
DBX Drive Rack PA2
I’m not even in the same league with you guys equipment wise, but I have to chime in. I guess a lot depends on your definition of a rack. For total flexibility a 19” true “rack” is a good choice. As mentioned above various RU shelf units are available. An honest to goodness rack will support anything the manufacturer sent with rack ears attached or as options.

I’ve been known to move equipment in and out and around and never is there a need for major adjustment or reconfiguring shelves, which is what most of these “racks” are.

Assembling a good rack does require some fabrication skills so if you were unable to cut threaded rod it may not be for you, or a rabbit hole you’d like to pursue, but off the shelf options often leave you desiring more. I do understand WAF is a big part too for a lot of folks.

I’m a DIY guy so I enjoy that part of the build and have many of the fab skills to do myself. Bud industries (and others) make many very useful if not high on the industrial look and low on WAF scale solutions. Many custom installs are built around Bud rack rail.
 

Attachments

  • BB1235BF-D647-47EE-BBFA-56D651D32B47.jpeg
    BB1235BF-D647-47EE-BBFA-56D651D32B47.jpeg
    150.6 KB · Views: 25
  • B27EE880-D8AD-44F9-8656-7421E5040A23.jpeg
    B27EE880-D8AD-44F9-8656-7421E5040A23.jpeg
    270.7 KB · Views: 22
Last edited:
  • Post hidden due to user being banned.
  • Post hidden due to user being banned.

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
5,148
Location
Alabama
More  
Preamp, Processor or Receiver
StormAudio ISP Elite 24 MK3 Processor
Main Amp
McIntosh MC1.25KW Monoblock Amps
Additional Amp
StormAudio PA 16 MK3
Computer Audio
Intel NUC w/ Roon ROCK
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player (for media discs)
Front Speakers
RTJ 410
Center Channel Speaker
MartinLogan Focus C-18
Front Wide Speakers
JTR Neosis 110HT
Surround Speakers
JTR Neosis 210RT
Surround Back Speakers
JTR Neosis 210RT
Front Height Speakers
JTR Neosis 110HT-SL
Rear Height Speakers
JTR Neosis 110HT-SL
Subwoofers
JTR Captivator 2400 x6
Other Speakers or Equipment
VTI Amp Stands for the Monoblocks
Video Display Device
Sony 98X90L
Remote Control
Universal MX-890
Streaming Equipment
Kaleidescape | FireCube | Lenova Carbon X1 and Intel NUC for Roon
Streaming Subscriptions
Lifetime Roon Subscription
Tidal
qobuz
Netflix
Amazon Prime
Satellite System
Dish Joey 4K
Other Equipment
Zero Surge 8R15W-1 | Salamander Synergy Equipment Stand
I ended up ordering the Salamander Synergy Core ... a custom build direct from Salamander. They are making it the right height for me, so I should be good to go in about 3-4 weeks.

Now I need two black amp racks for my monoblocks that are 11" wide x 9.5" deep. The 23" wide amp stands are way too big.
 
  • Post hidden due to user being banned.

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
5,148
Location
Alabama
More  
Preamp, Processor or Receiver
StormAudio ISP Elite 24 MK3 Processor
Main Amp
McIntosh MC1.25KW Monoblock Amps
Additional Amp
StormAudio PA 16 MK3
Computer Audio
Intel NUC w/ Roon ROCK
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player (for media discs)
Front Speakers
RTJ 410
Center Channel Speaker
MartinLogan Focus C-18
Front Wide Speakers
JTR Neosis 110HT
Surround Speakers
JTR Neosis 210RT
Surround Back Speakers
JTR Neosis 210RT
Front Height Speakers
JTR Neosis 110HT-SL
Rear Height Speakers
JTR Neosis 110HT-SL
Subwoofers
JTR Captivator 2400 x6
Other Speakers or Equipment
VTI Amp Stands for the Monoblocks
Video Display Device
Sony 98X90L
Remote Control
Universal MX-890
Streaming Equipment
Kaleidescape | FireCube | Lenova Carbon X1 and Intel NUC for Roon
Streaming Subscriptions
Lifetime Roon Subscription
Tidal
qobuz
Netflix
Amazon Prime
Satellite System
Dish Joey 4K
Other Equipment
Zero Surge 8R15W-1 | Salamander Synergy Equipment Stand
Looks nice ... a bit overkill being my amps only weigh 12.5lbs each. This one is 15" wide by 12" deep... perfect dimensions.

37565
 
  • Post hidden due to user being banned.

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
5,148
Location
Alabama
More  
Preamp, Processor or Receiver
StormAudio ISP Elite 24 MK3 Processor
Main Amp
McIntosh MC1.25KW Monoblock Amps
Additional Amp
StormAudio PA 16 MK3
Computer Audio
Intel NUC w/ Roon ROCK
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player (for media discs)
Front Speakers
RTJ 410
Center Channel Speaker
MartinLogan Focus C-18
Front Wide Speakers
JTR Neosis 110HT
Surround Speakers
JTR Neosis 210RT
Surround Back Speakers
JTR Neosis 210RT
Front Height Speakers
JTR Neosis 110HT-SL
Rear Height Speakers
JTR Neosis 110HT-SL
Subwoofers
JTR Captivator 2400 x6
Other Speakers or Equipment
VTI Amp Stands for the Monoblocks
Video Display Device
Sony 98X90L
Remote Control
Universal MX-890
Streaming Equipment
Kaleidescape | FireCube | Lenova Carbon X1 and Intel NUC for Roon
Streaming Subscriptions
Lifetime Roon Subscription
Tidal
qobuz
Netflix
Amazon Prime
Satellite System
Dish Joey 4K
Other Equipment
Zero Surge 8R15W-1 | Salamander Synergy Equipment Stand
lol... very true.

Need two stands... amps are on each side of center... no room to place them on the same stand and keep it all symmetrical.
 

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
5,148
Location
Alabama
More  
Preamp, Processor or Receiver
StormAudio ISP Elite 24 MK3 Processor
Main Amp
McIntosh MC1.25KW Monoblock Amps
Additional Amp
StormAudio PA 16 MK3
Computer Audio
Intel NUC w/ Roon ROCK
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player (for media discs)
Front Speakers
RTJ 410
Center Channel Speaker
MartinLogan Focus C-18
Front Wide Speakers
JTR Neosis 110HT
Surround Speakers
JTR Neosis 210RT
Surround Back Speakers
JTR Neosis 210RT
Front Height Speakers
JTR Neosis 110HT-SL
Rear Height Speakers
JTR Neosis 110HT-SL
Subwoofers
JTR Captivator 2400 x6
Other Speakers or Equipment
VTI Amp Stands for the Monoblocks
Video Display Device
Sony 98X90L
Remote Control
Universal MX-890
Streaming Equipment
Kaleidescape | FireCube | Lenova Carbon X1 and Intel NUC for Roon
Streaming Subscriptions
Lifetime Roon Subscription
Tidal
qobuz
Netflix
Amazon Prime
Satellite System
Dish Joey 4K
Other Equipment
Zero Surge 8R15W-1 | Salamander Synergy Equipment Stand
Finally got my Salamander rack in... and I ended up getting a couple of video monitor stands for the amps. Here a shot with the flash... couldn't see it without the flash.

38531
 
Top Bottom