Cant calibrate M-Audio M-Track 2x2 in REW 5.20 / Mojave 10.14.2

[Ozric]

Hi All,

I'm new here. I used REW with Sierra with no problems, since Mojave installed first I was not able to measure due to no input from sound card, then I uninstalled previous version of REW (it was 5.18 I think), I installed 5.20 and I can i.e. make "Check Levels" and it shows levels correctly, (so I have in and out signals) but in "Preference" window, clicking "Calibrate" button soft looks like hanged and no working

Please, help!

Thanks in advance!

 

[Wayne A. Pflughaupt]

Unless you need it for a timing reference, you can skip the calibration. Most interfaces these days have ruler flat response and as such don’t need calibration.

Regards,
Wayne

 

[John Mulcahy]

Calibrate soundcard isn't working on macOS for 5.20 beta 2, it is fixed for the next beta. As Wayne says, you can just skip it.

 

[Ozric]

Thanks!

 

[morespeeder]

Hello, i’ve just got a M-Audio track 2x2 and i get a minidsp umik-1 for analyse and calibrate my system.
I use osx Mojave with the last rew version from this forum.
When i try to check level, there is not sound output from the track 2x2.. if i choose another output, i have sound output.

Can you help me please? Is it because is a bêta version of rew?

Thanks you !

 

[John Mulcahy]

I think it is unlikely to be a beta issue, but you never know. On the REW soundcard preferences there is an option to generate a debug file, please use that when the track 2x2 is connected and selected in REW and attach the file here.

 

[morespeeder]

Here is the debug file, but today it's working fine. I've got a output signal on the track 2X2 and I've made some measurements with the Umik-1.
Thanks you for your help!