Calibration Ruins Impedance Measurements

bangiel

Registered
Thread Starter
Joined
Apr 7, 2021
Messages
16
No filtering looks better to me:
45057
 

bangiel

Registered
Thread Starter
Joined
Apr 7, 2021
Messages
16
Ok, the grand finale. I ran 4M, High Filtering during the calibration and measurement steps:

Mesa Traditional 4x12 (Celestion V30s) - no port (afaik)
45059


Mojotone Grand Canyon 4x12 (Celestion V30, Mojotone BV30H) - rectangular port at bottom of front baffle
45060


Mojotone Twin Canyon 2x12 (Celestion V30 and G12H75) - rectangular port at bottom of front baffle
(this one stands out to me because of how many peaks I measured)
45061


Mesa Widebody 1x12 (Celestion C90) - triangular port on the right side of the front baffle (relative to looking at enclosure)
45062


Mesa Widebody 1x12 (Celestion V30) - triangular port on the right side of the front baffle (relative to looking at enclosure)
45063
 

John Mulcahy

REW Author
Joined
Apr 3, 2017
Messages
7,212
The multiple peaks in your initial measurements may be due to the different resonances of the 4 drivers in the enclosure, the single driver measurements are more typical of what one would expect as folk are mostly measuring single drivers.
 
Top Bottom