Automatic selection for the Inputs/output

[oliver]

Dear John,

I use REW on Mac for SPL and Impedance measurements, so depending on the measurement I have to change the inputs and the output of the audio card.
Do you think it would be possible to add the possibility that, depending on the type of measurement chosen, REW automatically stores and selects the inputs and outputs set?
Thank you,
Best Regards.
Oliver.

 

[John Mulcahy]

It would need a different approach to I/O setup, since currently the I/O selection is independent of the type of measurement. Something for me to think about for the future though.