ASIO4ALL Issues

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
2,710
Location
Alabama
My AV System  
Preamp, Processor or Receiver
NAD M17 v2
Main Amp
Emotiva XPA-1 Gen 2 Monoblocks
Additional Amp
Emotiva XPA Seven
Other Amp
Emotiva A-150
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player
Front Speakers
MartinLogan Classic ESL 9
Center Channel Speaker
MartinLogan Focus C-18
Surround Speakers
MartinLogan ElectroMotion ESL
Surround Back Speakers
MartinLogan Motion 12
Front Height Speakers
MartinLogan EM-IC
Rear Height Speakers
MartinLogan EM-IC
Subwoofers
SVSound SB16-Ultra x 4
Video Display Device
Epson 6050
Screen
Elite Screen
Remote Control
Universal MX-890
Other Equipment
Dish Joey 4K
I am all of the sudden having issues with ASIO4ALL with REW. I am able to get FlexASIO to work, but I'd still like to figure out what's going on with ASIO4ALL.

When I try to load it in REW I get the following error:

ASIO4ALL V2 GENERATED AN ERROR

COM.SYNTHBOT.JASIOHOS.ASIOEXCEPTION: NO INPUT OR OUTPUT IS PRESENT

I am getting input thru my UMIK-1 and output thru my processor... tested in Sound settings, etc... all works fine. And as mentioned, works in FlexASIO as well.

I tried uninstalling ASIO4ALL and reinstalling it, but upon execution of the file, I get the following:

error opening file for writing

I've tried Run as Administrator and run the compatibility troubleshooter to no avail.

This was working all fine just last week. Scratching my head at what could be causing the issue.
 

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
2,710
Location
Alabama
My AV System  
Preamp, Processor or Receiver
NAD M17 v2
Main Amp
Emotiva XPA-1 Gen 2 Monoblocks
Additional Amp
Emotiva XPA Seven
Other Amp
Emotiva A-150
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player
Front Speakers
MartinLogan Classic ESL 9
Center Channel Speaker
MartinLogan Focus C-18
Surround Speakers
MartinLogan ElectroMotion ESL
Surround Back Speakers
MartinLogan Motion 12
Front Height Speakers
MartinLogan EM-IC
Rear Height Speakers
MartinLogan EM-IC
Subwoofers
SVSound SB16-Ultra x 4
Video Display Device
Epson 6050
Screen
Elite Screen
Remote Control
Universal MX-890
Other Equipment
Dish Joey 4K
I was able to get the ASIO4ALL installed again. REW was tying up the .ddl file even though it was not running. I had to go into Task Manager and stop REW from running in the background.

However, I still get the above error for no input or output present.

I get this in REW Preferences:

34996
 

John Mulcahy

REW Author
Joined
Apr 3, 2017
Messages
3,506
Looks like there may still be an issue with the ASIO4All installation if REW cannot load the driver. The no inputs or outputs message can occur if none of the available devices are selected for use in the ASIO4All control panel.
 

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
2,710
Location
Alabama
My AV System  
Preamp, Processor or Receiver
NAD M17 v2
Main Amp
Emotiva XPA-1 Gen 2 Monoblocks
Additional Amp
Emotiva XPA Seven
Other Amp
Emotiva A-150
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player
Front Speakers
MartinLogan Classic ESL 9
Center Channel Speaker
MartinLogan Focus C-18
Surround Speakers
MartinLogan ElectroMotion ESL
Surround Back Speakers
MartinLogan Motion 12
Front Height Speakers
MartinLogan EM-IC
Rear Height Speakers
MartinLogan EM-IC
Subwoofers
SVSound SB16-Ultra x 4
Video Display Device
Epson 6050
Screen
Elite Screen
Remote Control
Universal MX-890
Other Equipment
Dish Joey 4K
That's why I uninstalled and reinstalled.

I check the ASIO4ALL control panel and all devices are lit up bright blue.

Scratching head for sure.
 

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
2,710
Location
Alabama
My AV System  
Preamp, Processor or Receiver
NAD M17 v2
Main Amp
Emotiva XPA-1 Gen 2 Monoblocks
Additional Amp
Emotiva XPA Seven
Other Amp
Emotiva A-150
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player
Front Speakers
MartinLogan Classic ESL 9
Center Channel Speaker
MartinLogan Focus C-18
Surround Speakers
MartinLogan ElectroMotion ESL
Surround Back Speakers
MartinLogan Motion 12
Front Height Speakers
MartinLogan EM-IC
Rear Height Speakers
MartinLogan EM-IC
Subwoofers
SVSound SB16-Ultra x 4
Video Display Device
Epson 6050
Screen
Elite Screen
Remote Control
Universal MX-890
Other Equipment
Dish Joey 4K
Not when I look at the Task Manager... don't see anything under Processes, Startup or Services that I recognize that would be using it.

Here is the control panel selections...

35003




I noticed I only get this error when I select the UMIK-1 mic in Preferences... it pops up.

35002
 

Sonnie

Senior Admin
Staff member
Thread Starter
Joined
Apr 2, 2017
Messages
2,710
Location
Alabama
My AV System  
Preamp, Processor or Receiver
NAD M17 v2
Main Amp
Emotiva XPA-1 Gen 2 Monoblocks
Additional Amp
Emotiva XPA Seven
Other Amp
Emotiva A-150
Universal / Blu-ray / CD Player
Panasonic UB9000 4K UHD Player
Front Speakers
MartinLogan Classic ESL 9
Center Channel Speaker
MartinLogan Focus C-18
Surround Speakers
MartinLogan ElectroMotion ESL
Surround Back Speakers
MartinLogan Motion 12
Front Height Speakers
MartinLogan EM-IC
Rear Height Speakers
MartinLogan EM-IC
Subwoofers
SVSound SB16-Ultra x 4
Video Display Device
Epson 6050
Screen
Elite Screen
Remote Control
Universal MX-890
Other Equipment
Dish Joey 4K
When I select FlexASIO it changes it. Changing it to 44.1 doesn't help... still get the error.
 
Top Bottom