REW Beta Release Acoustic Timing Reference

Discussion in 'Official REW (Room EQ Wizard) Support Forum' started by proper88, May 13, 2019 at 1:14 PM.

  1. proper88

    proper88 New Member
    Thread Starter

    Joined:
    Mar 23, 2018
    Messages:
    2
    Likes Received:
    0
    Hi,
    i generate a measurement sweep file with the generator.

    Then i import this file in the "make a measurement " panel. This is not possible because when i choose left channel i get the message
    "Data Missing ..."
    When i use right channel i get the message
    "Sweep missing"

    I only want the sweep singal on the right channel und the acoustic reference signal on the left channel, is this not possible ?

    Thanks for support,
    proper88
     

    Attached Files:

  2. John Mulcahy

    John Mulcahy REW Author

    Joined:
    Apr 3, 2017
    Messages:
    1,537
    Likes Received:
    281
    It isn't possible, but it should be. I'll fix it for the next beta.
     
  3. John Mulcahy

    John Mulcahy REW Author

    Joined:
    Apr 3, 2017
    Messages:
    1,537
    Likes Received:
    281
    In the meantime generate another sweep file with the sweep on both channels and tell REW that's the file to use, while you actually use the one you already generated.
     
  4. proper88

    proper88 New Member
    Thread Starter

    Joined:
    Mar 23, 2018
    Messages:
    2
    Likes Received:
    0
    Hi John,
    thank you for your support,
    workaround is working great!
     

Share This Page