3dbinCanada
Moderator
Thread Starter
- Joined
- Dec 29, 2020
- Posts
- 1,708
More
- Preamp, Processor or Receiver
- Yamaha RX-A3060, RX-V1900, RX-V1075
- Universal / Blu-ray / CD Player
- Yamaha BD-S681, Sony UBP-X800, Oppo BDP-83
- Streaming Equipment
- BlueSound Node2i
- Front Speakers
- PSB Image T65, PSB Century 800, PSB Century 300
- Center Channel Speaker
- PSB Image 8C, PSB Century200, PSB Century 100
- Surround Speakers
- PSB Image 1B, RBH A600, PSB Alpha Minis
- Surround Back Speakers
- PSB Image 1B
- Subwoofers
- Rythmik LV12-R, PSB Subsonic 6, PSB Subsonic 5
- Video Display Device
- UN65KU6491 65"/UN55MU7000 55"/UN50MU7100 50"
- Remote Control
- Logitech Harmony 650
I have a system set up in the 2nd bedroom comprised of a JBL 5.1 soundbar system and what equates to today as an ancient LCD today, a Vizio SV470M dumb display. I hung a ROKU stick off of it for streaming flicks and access to my music library. I stuck the sub at the head of the bed on the right side in the corner. Today, I used REW to hunt for the sweet spot in that room. Here's the measurement setup.
The sweet spot turned out to be at the foot of the bed against the wall.
Here are the measurements for the before and new sub location but this before I ran JBL's calibration setup
Here's the measurement results for the before runnning and post running calibration results. I like the before calibration curve better. Its an easy fix to revert by simply unplugging the soundbar.
The sweet spot turned out to be at the foot of the bed against the wall.
Here are the measurements for the before and new sub location but this before I ran JBL's calibration setup
Here's the measurement results for the before runnning and post running calibration results. I like the before calibration curve better. Its an easy fix to revert by simply unplugging the soundbar.
