jonathan-x
Registered
Thread Starter
- Joined
- Sep 25, 2020
- Messages
- 2
More
- Preamp, Processor or Receiver
- Prism Orpheus
- Main Amp
- naim
- Front Speakers
- quad esl, audio physic virgo, ProAc monitors
- Center Channel Speaker
- Surround Speakers
- Surround Back Speakers
- no
- Front Height Speakers
- no front height speakers
- Rear Height Speakers
- no rear height speakers
- Subwoofers
- no subs
- Other Speakers or Equipment
- no
- Video Display Device
- no video display device
So i've already done a number of REW runs but a few years back. Never had any issues -- it all seemed very intuitive. now i'm having a HECK of a time just getting a basic plot.
the calibration bit seems OK though i'm maxing out my interface (converter) and it's only giving me about 60 dB.
MAINLY my complaint is that when i try to run a sweep, i'm getting mostly a semi rhythmic clicking out of my monitors - it will START to sweep but then stop before it even hits 80hz! anyone deal with this before? i set the sweep from 0hz to 20K.
is it possible there are core audio problems on high sierra? the only related odd thing i notice is that i can select my input converter just fine but it's only giving me the options 'java whatever' or 'default device' for the output device. Apple core audio is seeing both converters.
HELP?
the calibration bit seems OK though i'm maxing out my interface (converter) and it's only giving me about 60 dB.
MAINLY my complaint is that when i try to run a sweep, i'm getting mostly a semi rhythmic clicking out of my monitors - it will START to sweep but then stop before it even hits 80hz! anyone deal with this before? i set the sweep from 0hz to 20K.
is it possible there are core audio problems on high sierra? the only related odd thing i notice is that i can select my input converter just fine but it's only giving me the options 'java whatever' or 'default device' for the output device. Apple core audio is seeing both converters.
HELP?
