HugoBesnard
Registered
Thread Starter
- Joined
- Mar 24, 2022
- Messages
- 1
Hi everyone,
I am trying to obtaining T/S parameters for an electrodynamic speaker. The reference of the speaker is the following : OWR-06944T-16B from Ole Wolff. It is a in ear-driver with a resonance frequency at 3.1kHz. Due to his it size, I tried to use the 'sealed box' method, but unfortunately the 'box volume (liter)' parameter in the REW software is not enough accurate. I am wondering if anyone try the Thiele-Small method on REW to determine T/S parameters with a sealed box.
Thank you,
Hugo
I am trying to obtaining T/S parameters for an electrodynamic speaker. The reference of the speaker is the following : OWR-06944T-16B from Ole Wolff. It is a in ear-driver with a resonance frequency at 3.1kHz. Due to his it size, I tried to use the 'sealed box' method, but unfortunately the 'box volume (liter)' parameter in the REW software is not enough accurate. I am wondering if anyone try the Thiele-Small method on REW to determine T/S parameters with a sealed box.
Thank you,
Hugo
