Hi
Trying to debug this issue, not sure where it stems from (yet).
If you look at the two pictures you can see that the measurements has reoccurring oscillations, with a frequency separation of 2x/0.5x. It is easily identifiable in the impulse response, if these errors occur. Most, but not all measurements, will have these oscillations on the current setup. Note that their placement frequency wise, is not persistent, they move around for each measurement done.
I will try debugging this issue by switching measurement setup (entirely different OS and hardware, etc.) and go from there, I am just wondering if others have seen something similar, so that I can speed up the process.
Cant hear the deviations during the sweep, but I guess they are fairly minor, so I might not pick it up.
REW mdat dataset with multiple examples attached.
Found 'audmes' via Flathub, will try to do some simple measurements with that software tomorrow and compare.
Trying to debug this issue, not sure where it stems from (yet).
If you look at the two pictures you can see that the measurements has reoccurring oscillations, with a frequency separation of 2x/0.5x. It is easily identifiable in the impulse response, if these errors occur. Most, but not all measurements, will have these oscillations on the current setup. Note that their placement frequency wise, is not persistent, they move around for each measurement done.
I will try debugging this issue by switching measurement setup (entirely different OS and hardware, etc.) and go from there, I am just wondering if others have seen something similar, so that I can speed up the process.
Cant hear the deviations during the sweep, but I guess they are fairly minor, so I might not pick it up.
REW mdat dataset with multiple examples attached.
Found 'audmes' via Flathub, will try to do some simple measurements with that software tomorrow and compare.
Attachments
Last edited: