RussNC
New Member
Thread Starter
- Joined
- Jun 25, 2019
- Messages
- 9
More
- Preamp, Processor or Receiver
- Yamaha CX-A5200
- Main Amp
- ATI AT500NC
- Universal / Blu-ray / CD Player
- Sony UBP- X800M2
- Front Speakers
- Klipsch RP 8000F II
- Center Channel Speaker
- Klipsch RP-504C II
- Surround Speakers
- HSU CCB-8
- Subwoofers
- 4 Klipsch RP-1600SW
- Other Speakers or Equipment
- miniDSP 2x4 HD
- Video Display Device
- VISIO P759-G1
I've read the article on REW and room modes and already have my first question on the setup. I have a complex-shaped room with ceiling heights ranging from 9'-6' to 15'-2". The ceiling is vaulted over roughly 35' over multiple rooms, so I am focusing on an area that is within 15' in every direction from the seating area to take measurements. The guide suggests setting a speaker (sub) in one corner and the microphone in the opposite corner near the ceiling. I will be taking readings from multiple corners before some at the two seats, but do not have the ability to raise the mic to the full ceiling height. Is there a height lower than the ceiling that would sufficient to determine the room modes? Thanks for the help.