REW with RME Babyface Pro

[sverderb]

I am having an issue using a RME Babyface Pro interface with REW. I try to configure the loopback to create the calibration file for my interface but it maxes out the input and says it is clipping. I'm not able to adjust as needed. Any advice on how to configure this properly would be appreciated.
Thanks

 

[John Mulcahy]

Sounds like monitoring is active so the input is being fed back to the output, the output should only come from REW.

 

[sverderb]

Yes, found the answer in another post. I have it working now. Thanks for the quick reply