REW - V5.20.13 for Mac (L+R not integrating subs)

pmar4015

New Member
Thread Starter
Joined
Apr 6, 2022
Messages
11
More  
Preamp, Processor or Receiver
Denon 8500HA
Main Amp
3 Outlaw Audio 2220 (powering Main L/R/C)
Additional Amp
None
Other Amp
None
Computer Audio
None
DAC
Internal - Denon 8500HA
Universal / Blu-ray / CD Player
Sony UBP- X700/M 4K Ultra HD Home Theater
Front Speakers
Revel Proforma3 F208
Center Channel Speaker
Klipsch R-5800-W II (behind an AT screen)
Front Wide Speakers
None
Surround Speakers
ELAC Debut 2.0 OW4.2
Surround Back Speakers
Dayton Audio MK442T
Front Height Speakers
Top Front L/R: Revel IW65
Rear Height Speakers
Klipsch AW-400
Subwoofers
SVS PB-1000 (4 of these)
Other Speakers or Equipment
Gaming: XBOX X; Blu-ray Player: Sony UBP- X700(M)
Video Display Device
Sony VPL-VW325ES
Screen
106” Perforated/Acoustically Transparent
Streaming Equipment
Apple TV 4K (2021 Model/2nd Generation)
Streaming Subscriptions
Apple Music; HBOMAX; Disney; Showtime; STARZ;Hulu; Paramount Plus; Netflix
Other Equipment
Hardware DSP: MiniDSP 2X4 HD (Managing 4 subs)/Software DSP: MultEQ-X
I believe there may be a bug in version 5.20.13 for Mac in that when selecting L+R as the output the subs are not engaging. I have not experienced this with any prior versions of REW for Mac. Note: All settings in the Mac remain unchanged.

Please advise if a new setting has been introduced in Version 5.20.13 to remedy this problem

Many thanks
 

pmar4015

New Member
Thread Starter
Joined
Apr 6, 2022
Messages
11
More  
Preamp, Processor or Receiver
Denon 8500HA
Main Amp
3 Outlaw Audio 2220 (powering Main L/R/C)
Additional Amp
None
Other Amp
None
Computer Audio
None
DAC
Internal - Denon 8500HA
Universal / Blu-ray / CD Player
Sony UBP- X700/M 4K Ultra HD Home Theater
Front Speakers
Revel Proforma3 F208
Center Channel Speaker
Klipsch R-5800-W II (behind an AT screen)
Front Wide Speakers
None
Surround Speakers
ELAC Debut 2.0 OW4.2
Surround Back Speakers
Dayton Audio MK442T
Front Height Speakers
Top Front L/R: Revel IW65
Rear Height Speakers
Klipsch AW-400
Subwoofers
SVS PB-1000 (4 of these)
Other Speakers or Equipment
Gaming: XBOX X; Blu-ray Player: Sony UBP- X700(M)
Video Display Device
Sony VPL-VW325ES
Screen
106” Perforated/Acoustically Transparent
Streaming Equipment
Apple TV 4K (2021 Model/2nd Generation)
Streaming Subscriptions
Apple Music; HBOMAX; Disney; Showtime; STARZ;Hulu; Paramount Plus; Netflix
Other Equipment
Hardware DSP: MiniDSP 2X4 HD (Managing 4 subs)/Software DSP: MultEQ-X
Thank you so much for the response and I certainly wouldn’t question the man who actually wrote the program, but for the life of me I can’t figure out what the source of the problem could possibly be.

Maybe I inadvertently changed a setting in the ‘MIDI’ section of MacOs

What is strange is when I run the Left or Center or Right speakers individually the subs fully engage

I will try to sort it out and let you know

Thanks again
 

pmar4015

New Member
Thread Starter
Joined
Apr 6, 2022
Messages
11
More  
Preamp, Processor or Receiver
Denon 8500HA
Main Amp
3 Outlaw Audio 2220 (powering Main L/R/C)
Additional Amp
None
Other Amp
None
Computer Audio
None
DAC
Internal - Denon 8500HA
Universal / Blu-ray / CD Player
Sony UBP- X700/M 4K Ultra HD Home Theater
Front Speakers
Revel Proforma3 F208
Center Channel Speaker
Klipsch R-5800-W II (behind an AT screen)
Front Wide Speakers
None
Surround Speakers
ELAC Debut 2.0 OW4.2
Surround Back Speakers
Dayton Audio MK442T
Front Height Speakers
Top Front L/R: Revel IW65
Rear Height Speakers
Klipsch AW-400
Subwoofers
SVS PB-1000 (4 of these)
Other Speakers or Equipment
Gaming: XBOX X; Blu-ray Player: Sony UBP- X700(M)
Video Display Device
Sony VPL-VW325ES
Screen
106” Perforated/Acoustically Transparent
Streaming Equipment
Apple TV 4K (2021 Model/2nd Generation)
Streaming Subscriptions
Apple Music; HBOMAX; Disney; Showtime; STARZ;Hulu; Paramount Plus; Netflix
Other Equipment
Hardware DSP: MiniDSP 2X4 HD (Managing 4 subs)/Software DSP: MultEQ-X
REW cannot affect how your device responds to the L+R signals.
Mr. Mulcahy, my profuse apologies as it appears the source of the problem lies solely with the user/me. I inadvertently checked the option “Invert Second Output”.

I unchecked and like magic……the problem disappeared!

Best,
 
Top Bottom