tcutter
Registered
Thread Starter
- Joined
- Jul 7, 2021
- Posts
- 3
More
- Preamp, Processor or Receiver
- Devialet 400
- Additional Amp
- Dayton SA1000
- DAC
- Devialet 400
- Computer Audio
- Roon Nucleus +
- Front Speakers
- Wilson Benesch Vectors
- Front Height Speakers
- 36 in
- Subwoofers
- DEBRA by James Romeyn
I use a JL Audio CR-1 crossover. When I turn the subs off but keep the crossover on and change the crossover on the mains, the REW sweep shows no change. Even though I have it set to 80 Hz, the sweep shows the inflection point to be around 110 Hz. It stays there if it's set to 50 or 150 Hz. When I play pink noise and change the crossover in real time and use the Octave RTA app on my iPhone, I see the high pass curve changing, so I believe the CR-! is working. Any suggestion on how to get the sweeps to reflect the new crossover settings?
