REW cal and limited bandwith

Giancarlo Bellomo

Registered
Thread Starter
Joined
May 15, 2018
Messages
2
Cal graph.jpg

Good morning,
I introduce myself, my name is Giancarlo and I'm passionate audio diyer
I use REW with which I find myself very well but sometimes happens to me, especially with the latest versions of REW that during the calibration process, the audio band stops at 10Khz. Can someone help me to understand what the problem is?
Thanks in advance
 

John Mulcahy

REW Author
Joined
Apr 3, 2017
Messages
7,212
What OS and soundcard are you using?

Premature cutoff at high frequencies can be a sign of a long buffering delay in the system, resulting in the input capture stopping before the sweep has finished playing out. That can be dealt with for measurements by using the acoustic timing reference feature and ticking the "Wait for timing reference" box on the Measure dialog when making the measurements, but calibration doesn't use a timing reference so it wouldn't help there. You could try reducing the Buffer settings in the REW soundcard preferences.
 

Giancarlo Bellomo

Registered
Thread Starter
Joined
May 15, 2018
Messages
2
I tried to change the settings as you suggested but nothing changes. This problem only occurs with some versions of the
 

Attachments

  • Cal screenshot.jpg
    Cal screenshot.jpg
    216.4 KB · Views: 16

John Mulcahy

REW Author
Joined
Apr 3, 2017
Messages
7,212
"Some versions of the..." what?

Have you tried selecting the actual output device rather than "Driver Audio principale"?
 
Top Bottom