Quick question on Gain matching in the C-DSP software

[andre2142]

I've been searching around for this in specific. Im pretty well informed on the gain structure, thus i usually go:

Using an oscilloscope*

Set gains on DSP on HU ->Set Gains on DSP -> Set Gains on amp.

On the DSP side specially for the miniDSP, where do I adjust the Gain? ( which tab )

C-DSP-8x12-DL

Here?

Here?

Here?

Or here?

 

[Sonnie Parker]

You can adjust it in the output tab or right click the speaker on the routing tab. It's going to accomplish the same thing.

 

[andre2142]

You can adjust it in the output tab or right click the speaker on the routing tab. It's going to accomplish the same thing.

Great thanks again!