REW Beta Release Measurement Issue

[CharlesG]

Working on calibrating my system for 4 days. I am stuck with the attached measurements. I am using the Umik1 with MiniDSP. I am using a Denon 8500h receiver as my pre amp with all channels pre amp assigned.
My issue is starting with -db on all 3 SVS subs. How do I by pass the AVR to go straight to the MiniDSP to rule out the AVR as the contributing factor to the poor measurements? See Attachment

 

[John Mulcahy]

Nothing attached, file too large, perhaps? You can split measurements between files to make smaller individual mdats for upload..

 

[CharlesG]

Nothing attached, file too large, perhaps? You can split measurements between files to make smaller individual mdats for upload..

 

[Jack1949]

Charles, you don't have any file attachments on either of your posts above. I could be wrong but I believe that is happening because you only have 4 posts so far and the site requires 10 posts before you are able to attach files to posts. Try adding 6 dummy posts to this thread, and then add another post with your file attachment, to see if that resolves your upload problem.

 

[CharlesG]

Thanks for everyone. No longer need assistance at this time.