Impulse response low signal

[Lba]

Hello!
The impulse response that I export from the generated filters low the original signal by 2db (regardless of the db of the target level)

How can I adjust the filters so that the signal does not decrease?
So I don't have to level the signal when using impulse response

 

[John Mulcahy]

What settings are you using to export the response?

 

[Lba]

 

[John Mulcahy]

Normalising sets the peak sample to 1. Use 32-bit float output (if your convolution engine can accept that) without normalising.

 

[Lba]

Solved! Thanks!!